Your needs, this model
Does it fit your priorities?
Does the fi-4750L's 250-sheet ADF maximum mean it can load 250 sheets of any paper size?
No. The historic 250-sheet figure is stated at 64 g/m² (17 lb), and the exact operator guide makes the permitted load dependent on paper size and weight. It separately limits stack height to 20 mm for A4/Letter and 10 mm for A3/11-by-17. Treat the capacity as a published maximum, not a guarantee for every stock, size or used unit.
Explore this need in the finder →Is Manual Feed mode a separate tray for envelopes or fragile originals?
No. The exact fi-4750L guide says Manual Feed mode has the operator insert each next document into the ordinary ADF chute one at a time while the scanner waits. The guide instead directs envelopes, wet-ink, folded, torn, coated, carbon and other difficult originals to the flatbed. Use the exact paper rules rather than treating the mode as a media exemption.
Explore this need in the finder →Will its TWAIN driver make it a modern USB scanner?
No. The documented base connection is SCSI-2; historical U.S. TWAIN/ISIS support is for old Windows releases. Neither a driver label nor an optional third-party slot proves USB or current operating-system compatibility. Confirm the actual card, cable, termination, host and named capture application before relying on a unit.
Explore this need in the finder →What should I verify before buying an older fi-4750L?
Match the exact fi-4750L nameplate to historical part reference CG01000-486301, then inspect the actual SCSI connector and any installed option board. Ask the seller to demonstrate duplex ADF and flatbed operation on your intended host, establish the feeder load for your paper, and document rollers, pad, shipping lock, carton contents, return terms and current service separately. No current seller package or working state is established here.
Explore this need in the finder →Short assessment: The Fujitsu fi-4750L is an earlier monochrome production scanner built around two genuinely different paper paths: a duplex ADF rated for a large stack and a flatbed for single, held-still originals. Its 250-sheet headline is conditional, its host connection is a legacy SCSI-2 port, and current software compatibility is not established. This is a reference for a buyer who can identify and support the exact old configuration—not a plug-and-play modern USB recommendation.
Large-format batches and a flatbed in one chassis
The U.S. product sheet describes a low-volume production duplex scanner with an ADF, separate 11.7-by-17-inch flatbed, monochrome/grayscale capture, and long-paper support up to 68 inches. It suits a workflow mixing loose pages with bound or awkward originals. The flatbed handles one original at a time; it does not add feeder capacity.
At 200 dpi in A4 portrait orientation, the manufacturer rates the unit at up to 55 pages per minute simplex or 100 images per minute duplex. These are rated scanner speeds, not measured time for a real batch after sorting, software, host transfer, blank-page handling, or output steps. The U.S. sheet gives 66 ppm/124 ipm for A4 landscape, while the archived Global model page gives 68/126 under its landscape row. I retain that small source discrepancy rather than choose a number by guess. The shared portrait figures are the cleaner comparison point.
Read “250 sheets” with the paper qualification
The 250-sheet maximum is stated at 64 g/m² (17 lb). The guide says chute capacity changes with paper size and weight and sets stack heights of 20 mm for A4/Letter and 10 mm for A3/11-by-17. Its ADF range is 52–127 g/m², with A8 limited to 127 g/m². A separate guide notice caps stock below 52 g/m² at 100 sheets; confirm that the exact stock is permitted and follow its chart rather than treating 250 as a universal or A3 load.
The guide also says not to mix widths in one batch, to flatten leading edges, and to reduce the load if mispicks or doubles occur. Staples/clips, wet ink, envelopes, curled or torn, coated/carbon, photo, perforated or irregular stock should not be pushed through the ADF because the scanner has a manual mode; the manual directs difficult originals to the flatbed and warns that ADF use can damage important papers.
Manual Feed is a mode, not another tray
The operator guide defines Manual Feed mode as waiting after each document so the operator can add the next sheet to the normal ADF chute. It controls a sequence, not a second tray or an exception to size, weight, thickness and media rules. For envelopes or other unusual originals, follow the guide's flatbed advice.
Although the ADF and flatbed both reach A3/11-by-17-inch dimensions, they answer different jobs: the bed holds an original still; the ADF moves a prepared stack of same-width loose sheets. Check the exact paper path, not just a feature label.
The SCSI-2 host is the largest compatibility hurdle
The documented base interface is SCSI-2 through a half-pitch 50-pin connection. The archived page names a third-party option-board slot, but that is not evidence that a particular used scanner contains a board or that it adds a desired host interface. Do not assume USB, Wi-Fi, Ethernet, or a modern adapter from the model name. Before purchasing, identify the port, the exact controller card and cable, termination, and the host arrangement; have the seller demonstrate a complete scan on the intended computer and capture application.
Historical U.S. materials list TWAIN/ISIS for Windows 98, 2000, Me, and XP; the archived driver page warns that unlisted OSes are incompatible. That is not proof of current Windows/macOS support, a current installer, an app match, or transferable software. A TWAIN requirement does not turn SCSI-2 into USB.
Earlier model status and configuration checks
PFU America places fi-4750L under Production / Discontinued for Service in its U.S. roster. That status does not establish an individual seller unit or service entitlement. The old family sheet names fi-4750L Large Hopper as CG01000-486301, a nameplate reference rather than a carton code. The adjacent fi-4750C Color row is a separate identity; its color and capacity details do not transfer.
The historical U.S. sheet lists 55.2 lb and a 27.4-by-20.5-inch width/depth footprint. Plan for a large chassis and consult its shipping-lock instructions before setup. The guide describes wear parts such as the pad assembly and pick rollers; check feed condition, maintenance, and actual parts support. Old warranty language does not attach to a used unit.
Who should consider it?
Only a narrow buyer should shortlist the fi-4750L: someone who needs the A3-class monochrome ADF/flatbed combination, is willing to verify a functioning legacy SCSI-2 host path and old drivers, and can check paper-by-paper loading and maintenance before relying on it. It is not a fit for someone who needs a documented current USB or wireless workflow, a touchscreen, mobile scanning, or computer-free cloud delivery. The reviewed model sources do not establish those capabilities.
No ownership, hands-on test, seller package, serial number, live condition, current price, or service entitlement is claimed. Check the nameplate, board, cables, included items, return terms and a live scan. Sources are the historical U.S. sheet and guide, exact-model archived PFU/Ricoh profile/software page, and current U.S. status roster; the archived profile warns that details may be out of date.
Key specifications
Key details at a glance
| Scanner class | Professional departmental flatbed adf |
|---|---|
| Manufacturer-listed simplex rate | 55 ppm |
| Manufacturer-listed duplex image rate | 100 ipm |
| Automatic document feeder capacity | 250 sheets |
| Optical resolution | 400 dpi |
| Connection options | SCSI-2 |
| Automatic duplex capture | Yes |
| Separate manual-feed route | Yes |
| Touchscreen | No |
| TWAIN driver documented | Yes |
Use the exact model’s instructions for operating limits, supplied equipment and version differences.
Sources for this review
Sources for this assessment
- PFU America U.S. discontinued scanner roster, Production / Discontinued for Service
- PFU/Ricoh Global archived exact fi-4750L model page
- Fujitsu U.S. historical fi-4750L low-volume production scanner datasheet
- Fujitsu fi-4750L Image Scanner Operator's Guide, C150-E200-02EN
- PFU/Ricoh Global archived fi-4750L software download page
- PFU/Ricoh Global exact fi-4750L page-linked product photograph
Compare the workflow before you choose
Use the finder to test your connection, paper and software requirements against the documented scanner arrangements.
