Paper handling
ADF, duplex and manual feed: what each route does
Earlier fi-6000NS: the 50-sheet boundary belongs to one network workflow
With earlier=yes, duplex and touchscreen required, the fi-6000NS, fi-6010N and ScanSnap N1800 each meet a 50-sheet ADF minimum on their documented Letter/A4 20-lb (80-g/m²) basis. Fifty sheets is a qualified per-load rating, not daily throughput; the N1800's exact US data sheet rates it at 20 ppm/40 ipm and documents one Ethernet panel workflow, not USB, Wi-Fi or current server support. Read the fi-6000NS assessment · Read the separate fi-6010N assessment · Read the N1800's model-specific load and connection limits · Keep those same choices and 50 sheets.
Raise only that minimum to 60 sheets and the fi-6000NS, fi-6010N and ScanSnap N1800 no longer qualify: each exact source set documents 50 sheets on the Letter/A4 20-lb (80-g/m²) basis. The duplex touchscreen ADS-3300W is another candidate under the 60-sheet answers. Check stock and the actual feed path before buying a used unit; no current seller condition or network fit follows from a historical rating. Review the fi-6000NS ceiling · Review the fi-6010N ceiling · Review the N1800's 50-sheet limit · Keep earlier, duplex and touchscreen and change only the minimum to 60.
With earlier=yes, duplex and touchscreen required, the fi-6000NS, fi-6010N and ScanSnap N1800 meet a 50-sheet ADF minimum on their qualified Letter/A4 20-lb (80-g/m²) loading basis; raising only that minimum to 60 excludes all three. This is a per-load requirement, not a daily-volume estimate: the result includes 44 reviewed configurations at 50 sheets and 30 when only that threshold rises to 60, so 14 configurations leave the result. Each named older model has its own Ethernet panel workflow rather than a USB-to-computer or Wi-Fi capture route. Their saved documentation describes network destinations that require setup; it does not establish present-day mail/server/security compatibility or confirm a used machine's condition and package. The fi-6000NS and fi-6010N are separate fi-series models; the N1800 is a distinct ScanSnap model with a separately rated 20 ppm/40 ipm specification. These are manufacturer ratings, not independent tests. The earlier fi-5530C2 shows why the selectors interact: its duplex ADF and documented 100-sheet Letter/A4 capacity do not establish touchscreen profile selection, so it is not a match for this full set of requirements. fi-6000NS assessment · fi-6010N assessment · ScanSnap N1800 assessment · Find the same earlier-inclusive task at 50 sheets · Compare the same task at 60 sheets.
fi-5900C: a 500-sheet A4 basis above the finder's selectable minimum
At a 20-sheet minimum, the earlier fi-5900C meets this USB/duplex/Manual Feed/TWAIN setup; its 500-sheet maximum is qualified to A4 at 80 g/m² and does not establish a daily workload. The separately reviewed fi-7600 is another candidate with its own loading basis. The earlier fi-5650C and fi-5750C assessments do not establish the separately required Manual Feed mode, so neither is treated as a match for that selection. Read the fi-5900C's full evidence and host limits · Keep earlier, USB, duplex, Manual Feed, TWAIN and 20 sheets together.
With only the minimum raised to 200 sheets, fi-5900C remains in the earlier-inclusive result because 500 exceeds that threshold on the same A4/80 g/m² basis, not an A3 loading claim. The distinct fi-7600 also remains; the fi-5900C review explains its host and source limits. Check each model's exact chart and used-unit condition. Keep the same earlier, USB, duplex, Manual Feed and TWAIN requirements at 200 sheets.
Earlier fi-series Workgroup ADF: 50 sheets is not a 60-sheet load
With earlier=yes, USB, duplex and a 50-sheet minimum, the fi-6110, fi-6130Z, fi-6130, fi-6230Z and fi-6230 meet the feeder threshold. The U.S. fi-6130/fi-6230 datasheet states Letter/A4 at 20 lb; the exact Z-model archive states A4 at 80 g/m². The fi-6230 and fi-6230Z also have a separate glass surface, not extra ADF capacity. These are per-load maximums, not daily throughput. fi-6110 · fi-6130Z · fi-6130 · fi-6230Z · fi-6230 · Keep earlier=yes, USB, duplex and the same 50-sheet minimum.
Raising only the earlier/USB/duplex minimum to 60 excludes all five fi-series models: each is specified for a maximum 50-sheet load. The U.S. and Global capacity sources qualify their figures by stock; neither a 50-sheet per-load maximum nor a 60-sheet task minimum is daily throughput. The Canon R40 II is a separate 60-sheet comparison. fi-6110 · fi-6130Z · fi-6130 · fi-6230Z · fi-6230 · Change only the same finder’s minimum to 60.
An ADF is a paper path with a loading limit
An automatic document feeder pulls loose sheets from a stack and presents them to the scanner. Its published sheet capacity tells you how many supported sheets may be loaded at once, not how many pages it can process unattended in a day. Manufacturers often specify a paper weight for the capacity figure. Mixed thickness, curled edges, staples, folds and damaged pages can change the job, and a feed sensor cannot make unsupported originals safe. Keep the relevant manual close when preparing a stack.
Simplex and duplex describe sides, not output quality
Simplex means one side is captured; duplex means both sides. A single-pass duplex scanner reads both sides during one pass, which avoids turning every page. A paired ppm and ipm claim generally separates sheets from image sides: for example, 45 ppm / 90 ipm counts 45 sheets with two images per sheet under the stated conditions. Real work also includes loading, page separation, blank-page decisions, naming files and checking the result. The rated speed does not cover all of those steps.
Manual feed is a separate route
Some ADF devices document a manual-feed mode for an occasional envelope, card, folded large original or note-bearing page. This can be useful when those items are not part of the usual stack. It does not necessarily mean a dedicated card scanner, an automatic return path or a promise that every plastic or fragile item is supported. Check the allowed size and thickness, whether a carrier sheet is required, and whether the manual describes single-feed handling.
Choose a different mechanism when paper must stay still
A flatbed can hold an original against glass, which matters for a bound page or a delicate sheet that should not travel through rollers. An overhead/contactless design photographs from above and may suit materials that do not feed, but its capture area, page flattening method and file workflow differ from an ADF. The category name alone does not establish which original types are supported. A book digitization project should be matched to a scanner specifically documented for the required page format and book shape.
Before scanning a high-value original
Check the supported document size and weight, remove clips without damaging the page, test a copy or expendable sheet, and inspect the output before the original is put away. For recurring stacks, compare the stated capacity and duty guidance with the actual workload. If the manufacturer does not provide a daily rating, treat that as an unknown rather than silently translating a peak speed into a volume guarantee.
Answer: automatic two-sided capture is essential
The earlier fi-6000NS also has manufacturer-rated duplex ADF capture, with 25 ppm / 50 ipm listed at A4 portrait and 200 dpi. Its 50-sheet active load is specifically Letter/A4 at 20 lb (80 g/m²); neither rating is an independent test or daily throughput. Keep earlier=yes and duplex required together.
The SP-1425 PA03753-B005 also qualifies for duplex-required: its ADF is rated up to 50 sheets on the guide's 80 g/m² and under-5-mm basis, while its flatbed is a separate one-at-a-time route. The base fi-7600 and standalone base fi-7700 are higher-volume duplex ADF models; each is rated up to 300 Letter/A4 sheets at its stated basis, with lower capacity for larger originals. The fi-7700 also has an integrated flatbed; neither FADGI package is the base configuration. The standalone base fi-8290 adds duplex capture and a letter-size flatbed to its 100-sheet ADF; the flatbed is separate from the stack feeder. The current U.S. fi-8700 pairs a duplex ADF rated at up to 300 A4/Letter sheets at 20 lb / 80 g/m² with a separate 12-by-18-inch flatbed; PFU says maximum capacity depends on document thickness. Review the fi-8290 feeder and flatbed · Review the SP-1425 ADF/flatbed distinction · Review the fi-8700 loading limits · Keep duplex required in the same-condition finder.
The Ricoh SP-2240 PA03880-B405 is a duplex ADF model; its 80-sheet maximum is specific to 80 g/m² paper and a stack under 8 mm, and its DirectScan PC-less Store claim remains unreconciled. Read the exact-model assessment · Keep duplex required in the same-condition finder.
The Epson ES-580W B11B258201 is a one-pass duplex desktop model. Its 100-sheet ADF figure is a Letter/80 g/m² per-load value, not a promise for heavier stock, every original or daily volume. Keep automatic duplex required in the same-condition finder.
The photo-first Epson FF-680W is also a duplex document-scanning candidate: Epson identifies it as a one-pass duplex sheet-fed scanner for supported originals. The separate photo/document app paths and media restrictions still govern the job. Keep duplex required in the same-condition finder.
The current-reference Brother ADS-4300N documents duplex capture through an 80-sheet ADF on Brother's 20 lb paper basis. Its up-to-40-ppm/80-ipm rate is a manufacturer maximum, not an end-to-end workflow promise. Keep duplex required in the same-condition finder.
The DS-785W B11B288201 is a single-pass duplex match; its ADF is rated for 100 Letter sheets at 80 g/m² and 80 Legal sheets at that weight. The DS-61000WN B11B283201 and DS-71000WN B11B284201 add a 150-sheet A3/A4 one-pass-duplex ADF at 80 g/m² plus an 11-by-17-inch platen; the DS-51000WN B11B277201 is a platen-only model without a documented duplex ADF. Read the exact-part DS-785W review and keep duplex required in the same-condition finder.
The U.S. base Epson DS-410 B11B249201 documents one-pass duplex through its ADF, with a 50-sheet Letter load at 21 lb (80 g/m²). It is a USB-to-computer route, not a network or mobile model. Keep automatic duplex required.
The DS-1730 B11B273201 qualifies for automatic duplex with its one-pass ADF and 60-sheet 80 g/m² loading basis; its flatbed is an additional original source, not extra ADF capacity. Read its feeder/source assessment · Keep duplex required in the finder.
The current-reference Canon R10 Red, R30 and R50 all have documented automatic duplex capture, but they are different routines: the R10 Red is a portable 20-sheet USB-bus-powered unit, the R30 is USB-only with a nominal 60-sheet ADF (40 legal sheets), and the R50 has USB/Wi-Fi, a 60-sheet ADF and higher published speed.
The Canon imageFORMULA RS40 adds another USB-connected duplex photo/document feeder. Canon's manual sets its maximum at 60 A4-or-smaller sheets at 80 g/m² / 22 lb (40 for larger-than-A4 paper), with the stack below 6 mm. The flatbed LiDE 400 and LiDE 300 are simplex platen scanners, not automatic duplex feeders.
The current-reference Canon DR-C360 (item 7629C002) is another USB duplex ADF profile: its exact U.S. sources state up to 100 sheets and 60 ppm/120 ipm under the manufacturer's speed conditions. Its shared manual file was unavailable, so verify the paper loading instructions before relying on the capacity limit.
The current-reference Epson WorkForce ES-400 II (B11B261201) uses a 50-sheet ADF and one-pass duplex capture over USB; its listed TWAIN driver suits a computer-owned scan path, not a separate manual-feed tray.
The separately listed Epson DS-730N TAA-compliant B11B259202 is another one-pass duplex profile. Its TAA-specific sheet states 100 sheets at 80 g/m² and rates 40 ppm/80 ipm under the specified Letter/300-dpi/USB condition. That makes it eligible at a 100-sheet minimum, but not 110; the printed ADF maximum is not daily duty. Open the finder with duplex required.
The newly resolved Epson duplex group contains seven additional current-reference entries: DS-870 TAA, DS-970, DS-30000, DS-32000, DS-60000, DS-70000 and DS-530 II TAA. Their ADF capacities differ; the flatbed-only DS-50000 has no automatic duplex.
Epson documents single-pass duplex on the ES-590W; its 45 ppm/90 ipm maximum is a manufacturer USB, Letter/300 dpi rating, not an independent test.
The ES-C380W captures two sides in one pass, but its ADF holds 20 sheets at 21 lb (80 g/m²), and its 30/60 rating is not end-to-end workflow time.
The ES-C320W (B11B270201) also captures both sides in one pass; its guide specifies a 20-sheet load at 21 lb (80 g/m²), not an all-stock batch size.
The ES-C220 (B11B272202) also captures both sides in one pass over USB; its 20-sheet ADF is specified at 21 lb (80 g/m²) and falls to 18, 15 and 12 sheets at the heavier listed weights.
The current-reference DS-C330, wireless DS-C480W, and DS-C490 also perform one-pass duplex capture. Each feeder holds 20 sheets at 21 lb (80 g/m²), with lower counts at heavier weights; manufacturer rates differ, and none is an independent throughput result.
The ES-60W (B11B253201) and ES-50 (B11B252201) are both sheet-feed simplex models, not duplex scanners; they scan one side and one inserted original at a time.
The portable DS-70 (B11B252202) and DS-80W (B11B253202) are also one-sheet simplex scanners; neither provides automatic two-sided capture, so each side of a two-sided original needs its own pass.
The WorkForce ES-865 (B11B250202) is another one-pass duplex candidate at a different capacity/speed tier. Epson lists up to 65 ppm/130 ipm at 200/300 dpi and specifies 100 Letter sheets at 21 lb (80 g/m²); the guide gives lower limits for other sizes and weights, so neither headline is a mixed-media or daily-throughput promise.
The ES-500W II (B11B263201) also captures both sides in one pass; the guide specifies a 50-sheet load at 21 lb (80 g/m²), with lower counts for heavier stocks.
The related DR-C340 (7291C002) and DR-C350 (7290C002) are separate current-reference USB duplex feeders with the same published 100-sheet ADF size; their rated speeds differ at 40 ppm/80 ipm versus 50 ppm/100 ipm. Treat the stated maximum as a per-load rating, not as a promise for every stock or a daily-volume rating.
With earlier=yes, the Canon DR-C225 II joins the duplex set with its distinct 45-sheet feeder and 25 ppm/50 ipm rating below the C340/C350 tier; it is not in the single duplex option's default current-reference result. Canon's exact sources describe a compact J-path and a different straight-through route; do not assume the path change creates a verified manual-feed procedure for every special original. Open the finder with duplex and earlier models selected.
Automatic duplex matters when both sides of a stack need capture without turning each sheet by hand; a duplex label still says nothing about the quality or verification of the resulting file. The Brother ADS-1350W and ScanSnap iX2400 are compact examples; compare them with the wired 50-sheet SP-1130Ne, 80-sheet SP-2240N, hybrid fi-8250, the Canon imageFORMULA R40II (SKU 7292C002) and R40II Receipt Edition (SKU 7292C009), and the distinct fi-8950 FADGI bundle, the fi-8930 FADGI bundle, fi-8820 FADGI package, fi-8290 FADGI package, fi-8190 FADGI bundle, and the distinct fi-7600 and fi-7700 FADGI bundles. Canon lists the standard R40II and Receipt Edition as separate packages with the same 60-sheet duplex USB scanner profile; the Receipt Edition changes the included software with a Scan to QuickBooks Online plug-in, not the sides captured or the feeder. The fi-7600 FADGI bundle (CG01000-308101) and fi-7700 FADGI bundle (CG01000-308201) both keep a 300-sheet duplex ADF; the fi-7700 adds a separate 12-by-18-inch flatbed, and package service adds no feeder capacity. The fi-8190 bundle, part CG01000-310281, and fi-8290 package, part CG01000-310280, each retain a 100-sheet duplex chassis; the fi-8290 adds a separate letter-size flatbed. Calibration and service layers add neither feeder capacity nor proof that resulting files conform. All seven assessed FADGI packages use duplex scanner chassis; service terms do not change the sides captured or verify the resulting file.
Open the finder with automatic duplex required.
The Epson DS-1760WN (B11B274201) combines single-pass duplex capture with a 60-sheet ADF at 80 g/m²; its glass platen is a separate one-at-a-time path, not added feeder capacity. Find automatic-duplex models.
The DS-790WN, DS-800WN EdgeLink and DS-900WN EdgeLink each have a 100-sheet one-pass duplex ADF. Their Letter/200–300 dpi USB ratings differ—45/90, 50/100 and 70/140 ppm/ipm respectively—and their published 7,000/8,000/11,000 peak daily figures are calculated guidance, not endurance testing. The 100-sheet load is stock- and paper-size-dependent, not an all-media promise. Compare automatic-duplex models.
The standard DS-870 B11B250201 qualifies for automatic duplex: its exact U.S. specification states one-pass duplex capture and a 100-sheet Letter load at 21 lb (80 g/m²). Read the DS-870 feeder review · Keep automatic duplex required.
The DS-530X B11B286201 is another one-pass duplex match; its guide rates the ADF at 100 Letter sheets at 80 g/m² and 80 Legal sheets at that weight. Read its size-and-stock limits · Keep automatic duplex required.
Exact-model reviews: DS-61000WN B11B283201 · DS-71000WN B11B284201.
The RR-600W B11B258202 and RR-620W B11B288203 both document one-pass duplex capture and a 100-sheet Letter load at 80 g/m². Their manufacturer speed claims differ—35/70 for the RR-600W and 45/90 for RR-620W under stated conditions—but neither is an independent throughput test. Keep duplex essential in the same-condition finder.
The portable ES-65WR B11B253203 and RR-60 B11B252204 are simplex one-sheet models, not automatic-duplex matches; an original's second side needs another pass. Keep automatic duplex required in the same-condition finder.
The RR-70W B11B253205 is also a one-sheet simplex scanner, not an automatic duplex feeder. The separate RR-400W B11B270202 does provide one-pass duplex through its ADF. Keep automatic duplex required in the same-condition finder.
Both Ricoh SP-1130N PA03811-B025 and SP-1120N PA03811-B005 document automatic duplex. Their shared 50-sheet ADF figure applies to 80 g/m² paper and a stack no thicker than 5 mm; the faster SP-1130N is rated at 30/60 ppm/ipm versus the SP-1120N at 20/40. Keep duplex required in the same-condition finder.
The earlier fi-6000NS is manufacturer-rated for automatic duplex ADF capture; that fact does not by itself establish a computer host or a current supported network. Keep earlier and duplex together.
Answer: a separate manual-feed route is essential
The fi-7600 base scanner and standalone base fi-7700 have a distinct Manual/Single feed mode for supported special originals; this is not another bulk tray, and the fi-7700 guide says the mode disables ultrasonic overlap detection. Keep the separate manual-feed requirement in the same-condition finder.
The base fi-8290 has a separate Manual Feed mode, but it is not another batch tray; PFU says scanning slows and overlap detection does not treat intentionally folded or multilayered media as multifeeds. Read the fi-8290 manual-feed limits · Keep the same manual-feed requirement.
PFU Japan's exact fi-8700 specification also lists a separate Manual Feed/Single mode. The inspected U.S. page and datasheet do not explain its procedure or supported media limits, so confirm the local operator's guide before relying on it for special originals; it is not another bulk tray or blanket approval for every stock. Read the fi-8700's regional manual-feed evidence · Keep the same manual-feed requirement.
The reviewed ES-580W does not have a separately documented manual-feed match: the inspected sources explain its ADF and special-original/carrier-sheet handling but do not establish a distinct bypass. Treat that capability as unknown, not as supplied by one-at-a-time ADF loading. Keep a separate manual-feed route required.
The FF-680W does not meet a separate manual-feed requirement: special or one-at-a-time originals use the same input tray under model-specific loading instructions, sometimes with a carrier sheet, rather than a dedicated bypass or second feed path. Keep a separate manual-feed route required in the same-condition finder.
The current-reference Brother ADS-4300N documents a Manual Single Mode for supported special originals. It is one-at-a-time ADF operation, not a second tray or a promise for every delicate original; the mode disables multifeed detection, so check the media instructions before using it. Keep the manual-feed requirement selected.
The DS-785W B11B288201 does not establish a separate manual-feed path: its host-started Automatic Feeding Mode uses the same ADF, and an optional carrier sheet still passes through that feeder. None of these three exact-part models has a documented separate manual-feed mode: the DS-51000WN's glass platen is not an ADF, and the DS-61000WN/DS-71000WN guide describes the ADF and glass as separate or sequential sources, not a manually selected feed path. See the DS-785W paper-path review and keep the separate manual-feed requirement selected.
Do not count the DS-410's special-original instructions as a separate manual-feed inlet. Epson describes those originals entering through the ADF with its page-separation lever adjusted; the reviewed base has no second feed path. See the DS-410 paper-path review and keep separate manual feed required in the finder.
The Canon R10 Red qualifies for a narrowly defined manual-feed need because its manual documents a separate one-card-at-a-time slot for supported plastic cards (86 × 54 mm; thickness/orientation limits apply). It is not a general envelope or folded-paper route: embossed cards have additional vertical-feed limits and may fail, and the standard ADF still holds only 20 sheets. No comparable general manual-feed support is verified for the R30 or R50.
The Canon DR-C225 II is not included for a required manual-feed route: its U.S. technical table says automatic or manual feeding, but the unavailable exact guide does not establish a separate special-original procedure. Keep this field unknown rather than treating the straight-through path as a positive answer.
Canon's technical table also lists automatic or manual document feeding for the RS40. Its manual gives narrower instructions for small or delicate photos and warns against feeding fragile or valuable originals directly; verify the exact media, carrier-sheet procedure and carton, since the page and manual differ on whether a carrier sheet is included.
The C380W guide documents a straight-path routine for supported one-at-a-time booklets and passports, but it is not a second batch tray and thicker passports need an optional carrier sheet.
The ES-C320W (B11B270201) guide likewise documents a straight path for supported special originals, including passports with an optional carrier sheet; this limited route is not another batch tray.
The ES-C220 (B11B272202) guide likewise provides a straight-path route for supported special originals one at a time; passport work requires a compatible optional carrier, so this does not create a second batch tray.
The current-reference DS-C330, DS-C480W and DS-C490 also have a separately selected straight path for supported one-at-a-time originals. The C330 requires an optional carrier for every passport; C480W carrier-sheet work must use a computer rather than panel cloud/USB destinations; the C490 has its own booklet/passport instructions.
The ES-60W and ES-50 have one input slot each; supported cards or receipts still use that same one-at-a-time path, not a separate manual-feed mode. They do not satisfy this distinct manual-feed requirement.
The DS-70 (B11B252202) and DS-80W (B11B253202) also lack a separately selected manual-feed mode: cards and supported delicate originals use the same one-sheet path, with a carrier sheet optional for some originals.
The DS-30000 and DS-32000 do document a separately selected Manual Feed position for supported one-at-a-time cards, folded originals, passport carriers and booklets. This is a selector position, not a second tray: the guide says double-feed detection is disabled in manual feed, so use Normal Feed for stacks; the DS-32000 additionally has a Delicate Feed setting for reduced-force batch handling.
A manual-feed requirement is for an occasional special original through a separately documented path, not permission to mix every envelope, card, fold, or fragile sheet into an ADF stack. Compare the Ricoh fi-8150, fi-8250, ScanSnap iX2500, the fi-8950, fi-8930, fi-8820, fi-8290, fi-8190, fi-7600 and fi-7700 FADGI packages, and the SP-2240N, whose datasheet lists an ADF/Manual Feed/Duplex scanner type. The fi-7600 and fi-7700 FADGI packages retain the pair's chassis-specific Manual Feed Mode with documented media/loading limits; the fi-7700's separate 12-by-18-inch flatbed is another path, not blanket approval for fragile originals. PFU's shared operator guide says the manual mode slows scanning and disables overlap detection for folded or multilayered originals. The fi-8190 and fi-8290 packages likewise retain the standard scanners' manual-feed modes; the fi-8290 also has a separate letter-size flatbed. That glass path is not a reason to feed unsupported originals through rollers. On the fi-8250, PFU describes special originals up to 7 mm but specifies a carrier sheet for booklets and distinct card limits; the fi-8950, fi-8930 and fi-8820 have separate U-turn and straight-through routes with their own media limits. The fi-8820 FADGI services do not widen those allowances. Consult each current model guide rather than treating one route’s allowance as universal. The SP-1130Ne is not included for this requirement because a distinct manual-feed mode is not established for it. Check permitted size, thickness, carrier-sheet guidance, and how each special original is handled.
Open the finder with a manual-feed route required.
The Epson DS-1760WN (B11B274201) illustrates why a platen is not counted as a separate manual-feed mode: its manual describes glass and ADF placement, but not a selected special-original feed inlet. A glass can help with a book or delicate page, yet the model does not meet a required dedicated manual-feed capability. Check the dedicated manual-feed requirement.
The DS-790WN, DS-800WN and DS-900WN do not meet a required separate Manual Feed route: their guides describe the ADF and Automatic Feeding Mode instead of a separately selected special-original inlet. Loading one sheet at a time in Automatic Feeding Mode does not create that dedicated route; check the exact manual for envelopes, cards or damaged originals. Find models with a manual-feed route.
B11B250201 does not meet a separate manual-feed requirement: its guide describes an ADF inlet, special-original procedures and optional carrier sheets, not another selected feed path. Check the DS-870 input-path distinction · Keep a separate manual-feed route required.
The DS-530X's Automatic Feeding Mode takes differing originals one by one through the same ADF after host setup; it is not a separate selected manual-feed path. Its optional flatbed dock is a different, Windows-only accessory and is not assumed in B11B286201. Read the feed-path distinction · Keep a separate manual-feed route required.
Exact-model reviews: DS-51000WN B11B277201 · DS-61000WN B11B283201 · DS-71000WN B11B284201.
The RR-600W and RR-620W are not matches for a separately selected manual-feed requirement. Their Automatic Feeding Mode places subsequent originals through the same ADF; the RR-620W review also distinguishes optional carrier-sheet handling from a second feed path. Keep the dedicated manual-feed requirement in the finder.
The ES-65WR B11B253203 and RR-60 B11B252204 also use their same single-sheet slot for supported cards/receipts and have no separate manually selected feed route. A carrier sheet is an accessory that travels through the original path, not an alternate inlet. Keep the manual-feed requirement in the same-condition finder.
The RR-70W B11B253205 likewise feeds one sheet at a time through its single inlet and does not document a separate manually selected feed path. In contrast, the RR-400W B11B270202 has a straight-path position for special originals, including one-at-a-time handling; this is not a second batch feeder. Keep a separate manual-feed route required in the same-condition finder.
The SP-1130N PA03811-B025 and SP-1120N PA03811-B005 are not counted for separate manual feed: the reviewed configuration and guide support their ADF, but do not establish a distinct manual-feed route. Keep a separate manual-feed route required in the same-condition finder.
The exact fi-6000NS is documented as an ADF-only network scanner; no separate manual-feed mode is established. Keep separate manual feed required in the same-condition finder.
The Ricoh fi-70F is a flatbed, not a stack feeder; PFU does not specify an ADF capacity, so it cannot clear even the first selectable 20-sheet minimum. A small document may fit on its A6 glass, but that is not a 20-sheet automatic load. Keep the 20-sheet minimum in the same-condition finder.
The unsuffixed earlier S1300 has a maximum 10-sheet ADF load on the specified 80 g/m² basis, below the finder's first selectable 20-sheet minimum; it cannot satisfy any numeric ADF choice from 20 through 200. Review the exact S1300 feeder limit · Test the 20-sheet minimum with earlier USB duplex choices.
The ScanSnap S300's archived specification and the S300M's Operator's Guide cap each model at ten sheets on their named paper bases, below the questionnaire's lowest 20-sheet minimum. The S300's U.S. and archived pages state different stock weights for its ten-sheet rating; the S300M guide further limits the load to A4/Letter or smaller, a stack no thicker than 1 mm and 64 g/m² / 17 lb. Read the S300 loading assessment · read the S300M loading assessment · Open the same earlier/USB/duplex finder at the 20-sheet minimum.
Answer: a 100-sheet minimum feeder capacity
The discontinued fi-6400 and fi-6800 each have a separate, qualified ADF load of up to 500 A4/Letter sheets at 80 g/m² (20 lb), above the questionnaire's 200-sheet ceiling. The 200-sheet answer is a minimum, not a maximum for these models; only earlier-inclusive combinations can admit them. Their exact reviews retain the paper-loading and legacy-host caveats: fi-6400 · fi-6800. Open the same earlier/USB/duplex/manual-feed/TWAIN/200-sheet combination.
At the selectable 200-sheet minimum, both fi-6400 and fi-6800 meet earlier=yes, USB, duplex, manual feed and TWAIN; each is rated for up to 500 A4/Letter sheets at 80 g/m² (20 lb). The feeder rating is stock-qualified, and TWAIN/host compatibility needs an exact-system check. fi-6400 review · fi-6800 review · Keep all six answers at 200 sheets.
The standalone fi-8290 meets a 100-sheet ADF minimum at the documented 80 g/m² (20 lb) paper and 10-mm stack limit; a 110-sheet minimum excludes it. This is a per-load limit for the stated stock, not a daily-volume claim. Review the fi-8290 loading basis · Keep the same 100-sheet minimum · Compare the 110-sheet minimum.
The standalone base fi-7700 clears a 100-sheet minimum on its 300-sheet A4/Letter-or-smaller basis at 80 g/m²; the shared guide gives only 100 sheets for larger originals at that weight. Capacity is per loading and the exact stock/stack instructions still apply. Keep the same 100-sheet minimum.
The fi-5950's qualified load of up to 500 A4/Letter sheets at 80 g/m² (20 lb) with the hopper low exceeds the questionnaire's 200-sheet ceiling; selecting 200 is a minimum, not a maximum for the scanner. It appears only with earlier=yes and when the exact USB, duplex, manual-feed and TWAIN requirements fit. Open the same earlier USB/duplex/manual-feed/TWAIN finder scenario with a 200-sheet minimum.
At the 20-sheet minimum, the SP-1130N PA03811-B025 and SP-1120N PA03811-B005 both qualify: each is rated for a 50-sheet ADF load at 80 g/m², subject to the guide's 5 mm stack limit. Keep the 20-sheet minimum.
At 30 sheets, both Ricoh models remain above the selected minimum because each exact configuration has the same 50-sheet ADF; do not treat 50 as stock-independent. Review the SP-1130N · review the SP-1120N · Keep the same 30-sheet minimum.
At a 50-sheet minimum, both the Ricoh SP-1130N PA03811-B025 and SP-1120N PA03811-B005 are at their stated ADF limit: PFU's shared guide qualifies 50 sheets only on 80 g/m² stock and a stack no thicker than 5 mm. The next selectable 60-sheet minimum excludes both. Read the SP-1130N loading notes · read the SP-1120N loading notes · Use the same 50-sheet minimum · Change only the minimum to 60.
At the next 60-sheet step, both SP-1130N and SP-1120N fall out: their documented ADF maximum is 50 sheets at 80 g/m² under a 5 mm stack limit. This is a real per-load boundary, not daily output. Review the SP-1130N · review the SP-1120N · Keep the 60-sheet minimum.
The SP-2240 PA03880-B405 meets an 80-sheet minimum only on the Operator's Guide basis of 80 g/m² paper and a stack under 8 mm; the next selectable 90-sheet minimum excludes it. This is a per-load condition, not a guarantee across mixed stock. Check the SP-2240 guide limits · Use the same 80-sheet minimum · Compare the 90-sheet boundary.
The Perfection V19 II and V39 II do not meet a 100-sheet minimum: their exact manuals describe glass flatbeds without ADFs, so there is no published feeder stack to compare with 100 or the next 110-sheet boundary. Keep a 100-sheet minimum · Compare 110 sheets.
The Epson ES-580W B11B258201 meets a 100-sheet minimum on the guide's Letter/80 g/m² basis, but the same table gives 86 at 90 g/m², 74 at 104 g/m² and 80 Legal sheets at 80 g/m². It drops out at a 110-sheet minimum. This is a per-load boundary, not a mixed-stock or daily-duty promise. Use the same 100-sheet minimum · Compare the 110-sheet boundary.
The FF-680W uses a conservative 80-sheet threshold from its detailed Letter/21-lb loading table: it remains included at 80 but is excluded at 90 and 100. Epson's product page and general specification say 100, so that discrepancy is a real caution rather than a standard-stock full-load promise. Keep the exact 80-sheet minimum · test 90 · test 100.
Brother rates the ADS-4300N at 80 sheets on a 20 lb paper basis: it clears the 80-sheet minimum, but not the next selectable 90-sheet step. Manual Single Mode does not increase the batch load. Use an 80-sheet minimum · Compare 90 sheets.
The discontinued ADS-1000W has a 20-sheet ADF at 20 lb, so with earlier models included it passes a 20-sheet minimum but falls out at 30. Its rear card slot handles supported plastic cards only; it is not a general-purpose manual-feed tray. Earlier-inclusive, 20-sheet finder · Earlier-inclusive, 30-sheet finder.
The DS-785W passes this 100-sheet minimum for Letter paper at 80 g/m², but its guide lists 80 Legal sheets at the same weight and lower counts for heavier Letter media. Check its loading table · Use the same 100-sheet minimum.
Canon's DR-C360 item 7629C002 is another 100-sheet USB duplex ADF candidate, but its exact manual was unavailable and its 13,000 suggested daily scans are a calculation, not an endurance test. The DR-C360 review notes that the same exact-model sources disagree on paper-weight and closed-depth values.
At this same 100-sheet threshold, the distinct DR-C340 (7291C002) and DR-C350 (7290C002) qualify on their published 100-sheet duplex ADFs. Each is a USB-to-computer scanner; the C350's rated speed is 50 ppm/100 ipm versus 40/80 for the C340. Raising the minimum to 110 sheets removes both 100-sheet C-series models, and their suggested daily figures are calculations rather than endurance evidence.
The Canon RS40 does not meet 100 sheets (its A4-or-smaller limit is 60); the LiDE 400 and LiDE 300 have no ADF capacity at all.
At a 100-sheet minimum, both the fi-8190 FADGI package, part CG01000-310281, and fi-8290 FADGI package, part CG01000-310280, match on 100-sheet scanner chassis; the fi-8290 adds a flatbed but neither calibration/service layer adds feeder capacity. The fi-7600 (part CG01000-308101) and fi-7700 (CG01000-308201) FADGI bundles use their standard 300-sheet ADF chassis and therefore pass this minimum; only the fi-7700 adds a 12-by-18-inch flatbed. Other choices include the hybrid fi-8250 and the Brother ADS-4900W or ScanSnap iX2500. The fi-8820 FADGI package shares its base model's 500-sheet chassis and adds service, not feeder capacity. The distinct fi-8950 FADGI package shares the fi-8950's 750-sheet chassis, not an added feeder; the fi-8930 FADGI package likewise uses its base model's 750-sheet feeder. Raising the minimum to 110 removes both 100-sheet fi-8190/fi-8290 bundles and other 100-sheet choices but keeps the 300-sheet fi-7600/fi-7700, the fi-8820, fi-8930, fi-8950 and their larger-feeder FADGI packages. Published ADF capacity is not a daily-throughput promise.
The Epson ES-590W (B11B288202) also meets 100 sheets per load for Letter paper at 80 g/m² with the stack below 12 mm. Epson's guide reduces that to 86 sheets at 90 g/m², 74 at 104 g/m², and 80 for Legal at 80 g/m², so the 100-sheet minimum is not a guarantee for every paper size or batch.
The Epson WorkForce ES-865 (B11B250202) also clears this minimum on a specific basis: its exact English guide lists 100 Letter sheets at 21 lb (80 g/m²), 86 A4 sheets at 24 lb and 80 Legal sheets at 21 lb. Those per-load figures are not a promise for heavier or mixed stock; its USB, one-pass duplex and TWAIN profile is separate from the ES-590W's Wi-Fi touchscreen workflow.
The exact TAA-part DS-730N B11B259202 joins the 100-sheet candidates on Epson's 80 g/m² ADF specification. Its matching is a paper-load threshold only; it does not establish agency approval, seller availability or performance on every stock. Raising the minimum to 110 removes this 100-sheet model. Check the same 100-sheet minimum or compare a 110-sheet threshold.
The standard DS-730N B11B259201 also clears a 100-sheet minimum, but Epson's standard specification does not state the 80 g/m² feeder basis shown on the separate TAA sheet; confirm actual paper and loading instructions.
Other individually documented Epson capacities make useful thresholds: DS-530 II TAA is 50 Letter sheets at 21 lb (80 g/m²), DS-870 TAA and DS-970 are 100, DS-30000 and DS-32000 are 120 in Normal Mode, and DS-60000/DS-70000 are 200 under stated stock conditions. The DS-32000 Delicate Mode reduces Letter/A4 capacity to 20 sheets, and the DS-50000 has no ADF, so neither its platen nor its special mode can be counted as a 120-sheet feeder.
The DS-30000 and Normal-Mode DS-32000 pass a 120-sheet minimum but leave when the requirement rises to 130; the DS-32000 Delicate Mode is separately limited to 20 Letter/A4 sheets. Open the same-condition finder at 120 sheets · compare the 130-sheet minimum. The 200-sheet DS-60000 and DS-70000 remain above those boundaries; DS-50000 has no qualifying ADF value.
Open the finder with a 100-sheet minimum.
With earlier models included, the DS-6500 B11B205221 meets a 100-sheet minimum on its 100-page ADF rating at 80 g/m²; this is per-load capacity, not daily volume or a promise for every stock. Open the earlier USB/duplex/TWAIN finder at 100 sheets.
Raising the same earlier, USB, duplex and TWAIN requirements to a 110-sheet minimum removes the DS-6500 because its documented ADF capacity is 100; the optional network module does not add feeder capacity. Open the same finder at 110 sheets.
The current-reference DS-790WN, DS-800WN and DS-900WN each publish a 100-sheet ADF capacity for Letter at 80 g/m² (their guides also give 80 legal sheets on that basis). They pass a 100-sheet minimum and leave when the same requirement rises to 110; heavier stock and media handling reduce the load. Feeder capacity is per load, not a daily-duty guarantee. Check the 100-sheet minimum or compare the 110-sheet boundary.
The standard DS-870 B11B250201 reaches a 100-sheet minimum only on the documented Letter/21 lb (80 g/m²) basis; the same guide lists 80 Legal sheets at that basis, and a 110-sheet minimum excludes its 100-sheet ADF. Review its paper-size limits · Open the 100-sheet finder · Test the 110-sheet boundary.
The DS-530X B11B286201 also meets the 100-sheet minimum for Letter at 80 g/m², but the manual lists only 80 Legal sheets at that weight and lower loads for heavier Letter stock. Check the exact DS-530X table · Open the same 100-sheet finder.
The DS-61000WN B11B283201 and DS-71000WN B11B284201 also meet this 100-sheet minimum on their exact-guide 150-sheet-at-80-g/m² ADF basis; stock and size still affect loading. Exact-model reviews: DS-61000WN B11B283201 · DS-71000WN B11B284201. Open the same-answer finder.
The DS-61000WN B11B283201 and DS-71000WN B11B284201 also meet this 120-sheet minimum on their exact-guide 150-sheet-at-80-g/m² ADF basis; stock and size still affect loading. Exact-model reviews: DS-61000WN B11B283201 · DS-71000WN B11B284201. Open the same-answer finder.
The DS-61000WN B11B283201 and DS-71000WN B11B284201 also meet this 130-sheet minimum on their exact-guide 150-sheet-at-80-g/m² ADF basis; stock and size still affect loading. Exact-model reviews: DS-61000WN B11B283201 · DS-71000WN B11B284201. Open the same-answer finder.
The separate RR-600W B11B258202 and RR-620W B11B288203 each pass 100 sheets only on Epson’s Letter/80 g/m², under-12-mm stack basis; Legal at 80 g/m² is 80, and heavier Letter loads are lower. RR-600W is rated 35/70 and RR-620W 45/90 under their different stated USB conditions. A 110-sheet minimum excludes both. 100-sheet finder · 110-sheet comparison.
The earlier no-N SP-1120 and SP-1130 are separate 50-sheet boundary examples. PFU specifies 50 sheets at A4 80 g/m² or Letter 20 lb and the shared manual limits stack height to 5 mm or less: they pass a 50-sheet minimum under that basis but leave at 60. Their 20/40 and 30/60 ppm/ipm ratings and expected daily values do not increase the feeder load. Keep earlier=yes and the same 50-sheet minimum · Compare at 60 sheets.
Answer: a 60-sheet minimum feeder capacity
The SP-1425 PA03753-B005 does not meet the next 60-sheet minimum: PFU rates its ADF at up to 50 sheets only on the specified 80 g/m², under-5-mm loading basis. For a documented alternative at this threshold, the Brother ADS-4300N is specified for up to 80 sheets at 20 lb; verify the exact load conditions. Review the SP-1425 feeder limit · Keep the same 60-sheet minimum.
The FF-680W meets this 60-sheet minimum on the detailed table's conservative 80-sheet Letter/21-lb loading basis. The 100-sheet general-spec conflict does not remove the need to match the actual stock. Keep the same 60-sheet capacity answer.
The ADS-4300N meets this 60-sheet threshold because its exact model specification states an 80-sheet ADF at 20 lb; check stock, thickness and paper size before planning a load. Keep the same 60-sheet minimum.
The DS-785W also clears a 60-sheet threshold on its 100-sheet Letter/80 g/m² basis; the limit varies with paper size and weight. Read the exact capacity conditions · Keep the 60-sheet finder threshold.
The DS-410 leaves the 60-sheet result for the normal Letter/21 lb (80 g/m²) load, which is rated at 50; its guide's 70-sheet count is for lighter 13 lb paper and should not be generalized. Read its stock-specific capacity limits · Keep the 60-sheet minimum.
The Canon R30 and Canon R50 also meet the nominal 60-sheet minimum and capture both sides automatically. Canon rates the R30 at 40 legal sheets, so check the legal-size load separately; the R50's listed 60-sheet capacity does not promise an unchanged load for every paper weight.
The imageFORMULA RS40 meets this threshold for A4-or-smaller paper only under the manual's 80 g/m² / 22 lb and under-6-mm stack conditions; larger-than-A4 capacity is 40 sheets. Its separate photo-load counts are not paper ADF capacity. Both LiDE flatbeds have no ADF and do not meet any numeric feeder minimum.
At a 60-sheet minimum, the Canon imageFORMULA R40II (7292C002) and R40II Receipt Edition (7292C009) qualify on their documented 60-sheet duplex ADFs; the QuickBooks Online plug-in changes the Receipt Edition software package but not its loading limit. The Brother ADS-3100 is another reviewed 60-sheet option, with a different model profile and software route. Both R40II packages drop out if the minimum rises to 70 sheets. Check the exact model rather than carrying a capacity across an entire family; feeder capacity is a per-load value, not a daily-volume rating.
The DR-C340 and DR-C350 also clear 60 sheets, but their real feeder threshold is 100, so they remain eligible when the minimum rises through 70 and 100.
The Epson ES-400 II leaves at 60 sheets: Epson's exact-model guide caps the supported paper load at 50 sheets at 21 lb, although the 60-sheet R40II and RS40 profiles still qualify.
The Epson ES-590W remains above this 60-sheet minimum on its documented Letter/80 g/m² basis. Its maximum drops with heavier stock, so use the manual's matching paper-size and weight value rather than treating the 100-sheet headline as universal.
The TAA-labelled DS-530 II B11B261203 leaves at 60 sheets because Epson's guide specifies 50 Letter sheets at 21 lb (80 g/m²). The current-reference DS-870 TAA/DS-970, DS-30000/DS-32000, and DS-60000/DS-70000 remain above this minimum at 100, 120 or 200 sheets respectively. Compare at this same threshold with the 60-sheet finder.
Open the finder with a 60-sheet minimum.
The standard DS-870 B11B250201 also meets a 60-sheet minimum under the guide's 100-sheet Letter/21 lb (80 g/m²) loading conditions; Legal and heavier pages use lower capacities. Check the detailed media limits · Keep the 60-sheet threshold.
Epson rates the Epson DS-1760WN (B11B274201) ADF at 60 sheets for 80 g/m² stock. It passes this 60-sheet threshold, but the source basis does not promise 60 on every heavier or mixed load. Compare the 60-sheet minimum.
The DS-1730 B11B273201 meets a 60-sheet minimum on the model guide's 80 g/m² basis (60 sheets, stack under 6.6 mm); at 70, that stated load falls short. The figure is per loading, not the separate 3,000-sheet peak daily-duty rating. Read the exact ADF limits · Keep a 60-sheet minimum.
The DS-61000WN B11B283201 and DS-71000WN B11B284201 also meet this 60-sheet minimum on their exact-guide 150-sheet-at-80-g/m² ADF basis; stock and size still affect loading. Exact-model reviews: DS-61000WN B11B283201 · DS-71000WN B11B284201. Open the same-answer finder.
At a 60-sheet minimum, neither model qualifies: the SP-1130N and SP-1120N each top out at 50 ADF sheets on the guide’s 80 g/m² / 5 mm loading basis. Review the SP-1130N · review the SP-1120N · Keep the same 60-sheet minimum.
Answer: a 20-sheet minimum feeder capacity
At a 20-sheet minimum, the SP-1425 PA03753-B005 qualifies on a 50-sheet ADF rating; PFU qualifies that load at 80 g/m² with a stack under 5 mm. Check the exact loading limits · Keep the same 20-sheet minimum.
The Epson Perfection V19 II and V39 II are flatbeds with no specified ADF or one-load sheet capacity. The 8.5 × 11.7 inch figure is platen area, not a one-sheet ADF rating; neither model qualifies for the lowest 20-sheet minimum or any higher positive ADF minimum. Keep the same 20-sheet minimum in the finder.
The FF-680W meets the 20-sheet minimum on its conservative 80-sheet Letter/21-lb loading basis; this per-load figure is not daily throughput. Keep the same 20-sheet minimum.
The Brother ADS-4300N clears this 20-sheet minimum with its 80-sheet ADF at 20 lb; the selected threshold is not a promise about mixed or heavier stock. Keep the same 20-sheet minimum.
The DS-785W clears the 20-sheet minimum on its documented 100-sheet Letter/80 g/m² load; heavier paper lowers its one-load limit. Review the paper-weight table · Use the same 20-sheet minimum.
The DS-410's guide supports at least a 20-sheet minimum for the stated 21 lb (80 g/m²) Letter load: its documented count is 50 sheets under that condition. This does not extend to every stock or special original. Check its loading table · Keep the 20-sheet minimum.
At the finder's 20-sheet minimum, the portable Canon imageFORMULA R10 Red qualifies with its documented duplex ADF. That figure is a per-load limit on supported plain paper; the R10's separate plastic-card slot accepts one specifically compatible card at a time and does not raise the feeder capacity. If one 20-sheet loading is essential, confirm stock, card compatibility and the manual's size/thickness guidance.
The RS40 also clears 20 sheets with its 60-sheet A4-or-smaller paper rating; that figure is conditional on Canon's stated paper weight and stack height. The CanoScan LiDE 400 and LiDE 300 have no feeder to load.
The 100-sheet duplex DR-C340 and DR-C350 also exceed this minimum; their full-capacity advantage only matters if supported stock can be loaded within Canon's instructions.
The Epson ES-400 II also passes the 20-sheet minimum, but its exact guide specifies a 50-sheet load at 21 lb (80 g/m²); that is not a promise for every mixed-stock batch.
The Epson ES-590W also clears 20 sheets; the exact guide's maximum is 100 Letter sheets at 80 g/m², not a mixed-stock or daily-volume rating.
The Epson ES-C380W (B11B269201) qualifies at 20 sheets with its one-pass duplex ADF; the guide bases that load on 21 lb (80 g/m²) paper and lists lower limits for heavier stock.
Another 20-sheet match is the Epson ES-C320W (B11B270201): its guide specifies 20 sheets at 21 lb (80 g/m²) and lower counts for heavier stock.
Another 20-sheet match is the current-reference ES-C220 (B11B272202): the guide specifies 20 sheets at 21 lb (80 g/m²), then fewer sheets for heavier stock.
The ES-60W (B11B253201) and ES-50 (B11B252201) each have one-sheet input capacity, below the finder's lowest selectable 20-sheet minimum; neither is a match for this numeric requirement.
The ES-500W II is not a 20-sheet-limited feeder: Epson's guide allows up to 50 sheets in one load at 21 lb (80 g/m²), with lower counts for heavier stock. That capacity says nothing about daily volume or mixed-paper reliability.
The Epson compact DS trio also clears this minimum: DS-C330, DS-C480W and DS-C490 each have a 20-sheet ADF at 21 lb (80 g/m²), with lower counts for heavier stock. All three capture duplex in one pass, but the C480W alone adds Wi-Fi, a phone route and touchscreen destinations.
The portable DS-70 (B11B252202) and DS-80W (B11B253202) each have a one-sheet input slot, not a stack ADF, so both fall below the lowest selectable 20-sheet minimum.
The DS-870 B11B250201 also clears the 20-sheet minimum, but that low threshold does not make it the first fit for a single short stack: its guide documents a 100-sheet Letter load at 21 lb (80 g/m²). Read its paper limits and workflow · Keep a 20-sheet minimum.
The DS-1730 B11B273201 clears a 20-sheet minimum on Epson's model-specific 60-sheet, 80 g/m² ADF basis; capacity varies by stock. Check the paper-specific 60-sheet limit · Keep a 20-sheet minimum.
The new Epson workgroup/large-format entries that meet this lowest setting range from the 50-sheet DS-530 II TAA, through 100-sheet DS-870 TAA/DS-970 and 120-sheet DS-30000/DS-32000, to the 200-sheet DS-60000/DS-70000. The DS-50000 is flatbed-only, so it has no ADF capacity to satisfy this numeric choice. The DS-32000's Delicate Mode has a 20-sheet Letter/A4 load, but the catalog match uses its separate 120-sheet Normal Mode fact.
Open the finder with a 20-sheet minimum.
The ES-65WR B11B253203 and RR-60 B11B252204 each have one-sheet input, below the first selectable 20-sheet ADF minimum. Automatic Feeding Mode means placing the next page individually; it does not create a stack feeder. Keep the same 20-sheet minimum.
The DS-61000WN B11B283201 and DS-71000WN B11B284201 also meet this 20-sheet minimum on their exact-guide 150-sheet-at-80-g/m² ADF basis; stock and size still affect loading. Exact-model reviews: DS-61000WN B11B283201 · DS-71000WN B11B284201. Open the same-answer finder.
At a 20-sheet minimum with earlier models allowed, the ADS-1500W qualifies: Brother's exact U.S. guide limits its ordinary ADF to 20 sheets on the stated 20 lb / 80 g/m² or 2 mm basis, while alternate card and long-paper routes do not add stack capacity. This is a per-loading count, not the separate daily duty-cycle figure. Review its feeder and special-original limits · Use the same 20-sheet threshold with earlier models included.
With earlier=yes, Wi-Fi, automatic duplex, a separate manual-feed route and a 20-sheet minimum together, the ADS-1500W matches through its Wi-Fi plan and one-card Card Slot; its 20-sheet ADF remains the batch limit. This is a narrow card route, not a second stack feeder. Check its exact card-slot limit · Open the exact 20-sheet Wi-Fi/manual-feed finder.
The RR-400W B11B270202 also meets this minimum at its stated 20-sheet ADF load on 80 g/m² paper; it does not clear a 30-sheet minimum. The RR-70W B11B253205 accepts one original at a time, not a 20-sheet stack. Keep the same 20-sheet minimum in the finder.
The ADS-1700W also meets this exact earlier Wi-Fi/duplex/manual-feed combination at 20 sheets: its Wi-Fi plan supports duplex ADF batches and its separate Card Slot accepts one plastic card at a time. The ADF maximum is 20 sheets; at 30, it no longer meets the capacity requirement. Open the same 20-sheet-condition finder.
In the same earlier Wi-Fi/duplex/manual-feed case, the ADS-1200 is excluded because it is USB-only, while the ADS-2500We is excluded because its plastic-card route is through the ADF, not a separate manual-feed inlet. Use the exact 20-sheet Wi-Fi/manual-feed finder.
Interaction: earlier USB duplex/TWAIN versus a 20-sheet ADF minimum
The SP-1425 PA03753-B005 also meets earlier=yes, USB, duplex, TWAIN and a 20-sheet minimum; its 50-sheet ADF limit is qualified at 80 g/m² with a stack under 5 mm. Review the exact configuration · Keep all five conditions at 20 sheets.
The Ricoh SP-2240 PA03880-B405 meets this earlier=yes, USB/duplex/TWAIN/20-sheet condition; its 80-sheet basis depends on 80 g/m² paper and an under-8-mm stack. Review its loading conditions · Open the same 20-sheet finder conditions.
The SP-1130N PA03811-B025 and SP-1120N PA03811-B005 also meet earlier=yes with USB, duplex, TWAIN and a 20-sheet ADF minimum; their 50-sheet limit is subject to the guide's 80 g/m² and 5 mm conditions. Review the SP-1130N · review the SP-1120N · Keep the same answers at 20 sheets.
The current-reference photo/document FF-680W also fits this earlier-inclusive USB/duplex/TWAIN/20-sheet case; its conservative 80-sheet load tag is not permission to exceed the exact stock table.
For the same earlier=yes USB/duplex/TWAIN/20-sheet answer, the discontinued Epson DS-320 B11B243201 is a positive match at 20 sheets on its 80 g/m² basis. Its feeder holds 25 at 64 g/m² and 12 at 128 g/m²; its separate one-card route does not increase the ADF load. Use the identical 20-sheet finder conditions.
In the earlier USB-to-computer/duplex/TWAIN setup, Brother's discontinued DS-740D qualifies only while no ADF minimum is requested; adding the lowest 20-sheet ADF requirement excludes it because its guide specifies one sheet per loading, not a stack feeder. The 20-sheet condition matches the Brother ADS-1300's separately documented 20-sheet ADF, so do not translate one-sheet input into one-sheet ADF capacity. Review the DS-740D single-sheet limit · Compare the ADS-1300 ADF profile · Open the same earlier/USB/duplex/TWAIN finder at 20 sheets.
Both Ricoh models—the SP-1130N (PA03811-B025) and SP-1120N (PA03811-B005)—meet a 20-sheet ADF minimum; PFU’s shared guide allows a 50-sheet load at 80 g/m² only when the stack is no thicker than 5 mm. Review the SP-1130N · review the SP-1120N · Set a 20-sheet minimum.
Answer: raising the feeder minimum to 30 sheets
The SP-1425 PA03753-B005 also clears 30 sheets on its qualified 50-sheet ADF basis—80 g/m² stock and a stack under 5 mm—but leaves at 60. Review the SP-1425 feeder conditions · Keep the same 30-sheet minimum.
The V19 II and V39 II remain outside at 30 sheets as well as 20: neither exact model has an ADF, and manually placing one original on glass is not a rated ADF load. Keep the same 30-sheet minimum.
The FF-680W still meets the 30-sheet minimum on the detailed guide's conservative 80-sheet Letter/21-lb load. Confirm the exact original and stock before relying on a full batch. Use the same 30-sheet threshold.
The ADS-4300N also clears 30 sheets on Brother's 80-sheet/20 lb ADF basis. Its separate Manual Single Mode does not add batch capacity. Keep the same 30-sheet minimum.
The DS-785W still clears a 30-sheet minimum on the 100-sheet Letter/80 g/m² basis; the figure is not stock-independent. Check its loading conditions · Keep the threshold at 30.
The DS-410 also clears a 30-sheet minimum on its 50-sheet Letter/21 lb (80 g/m²) basis; the same guide gives lower counts for heavier stocks. See the DS-410 paper-weight details and apply the 30-sheet requirement in the finder.
Raising the minimum from 20 to 30 removes the 20-sheet Canon R10 Red. The R30 and other reviewed units with at least 30 sheets remain; a nominal sheet count does not prove that every paper stock loads to the maximum.
The RS40 remains above this threshold for its specified A4-or-smaller paper; the LiDE 400 and LiDE 300 are flatbeds without a stack feeder and stay outside all numeric ADF results.
The DR-C340 and DR-C350 remain above this threshold with their 100-sheet feeders; they leave only once the selected minimum rises above 100.
The Epson ES-400 II also clears 30 sheets at its published 50-sheet, 21 lb (80 g/m²) loading basis; it drops out at the next 60-sheet setting.
The Epson ES-590W also meets 30 sheets and the higher selectable ADF minima through 100 on its Letter/80 g/m² basis; the manual lists 86 at 90 g/m² and 74 at 104 g/m².
The 20-sheet Epson ES-C380W (B11B269201) leaves when the minimum rises from 20 to 30; its exact guide limits the standard-paper ADF load to 20 sheets at 21 lb (80 g/m²), with lower counts for heavier paper.
The ES-C320W (B11B270201) also leaves at a 30-sheet minimum: its model-family guide specifies at most 20 sheets on the 21 lb (80 g/m²) basis.
The ES-C220 (B11B272202) has the same 20-sheet maximum on 21 lb (80 g/m²) paper and leaves at 30; its special-original path does not raise feeder capacity.
The ES-60W and ES-50 remain below both the 20- and 30-sheet selections because each accepts one original at a time.
The portable DS-70 and DS-80W also remain outside both minima: their documented capacity is one sheet, so neither is a 20-sheet stack feeder.
The ES-500W II stays in a 30-sheet shortlist but leaves at the next selectable 60. Its guide lists 50 sheets at 21 lb (80 g/m²), 43 at 24 lb and 37 at 28 lb, so the feeder's useful threshold depends on the paper actually loaded.
Raising the minimum to 30 also removes all three compact DS models: the DS-C330, DS-C480W and DS-C490 each max out at 20 sheets on the stated 21 lb (80 g/m²) basis. Their straight paths take special originals one at a time and do not raise ADF capacity.
The newly reviewed Epson DS series has three larger capacity tiers above this threshold: the TAA DS-530 II is rated for 50 Letter sheets at 21 lb, the DS-870 TAA/DS-970 for 100, the Normal-Mode DS-30000/DS-32000 for 120, and the DS-60000/DS-70000 for 200. The DS-50000 has a flatbed but no ADF capacity.
The standard DS-870 B11B250201 passes a 30-sheet minimum; its highest 100-sheet capacity is specific to Letter at 21 lb (80 g/m²), with smaller loads for other papers. Check the exact feeder conditions · Keep a 30-sheet minimum.
The DS-1730 B11B273201 also clears a 30-sheet minimum on its model-specific 60-sheet ADF rating at 80 g/m²; the rating is not a mixed-stock or daily-volume promise. Check the exact loading basis · Keep a 30-sheet minimum.
Open the finder with a 30-sheet minimum.
The DS-61000WN B11B283201 and DS-71000WN B11B284201 also meet this 30-sheet minimum on their exact-guide 150-sheet-at-80-g/m² ADF basis; stock and size still affect loading. Exact-model reviews: DS-61000WN B11B283201 · DS-71000WN B11B284201. Open the same-answer finder.
When that same earlier-inclusive minimum rises to 30 sheets, the ADS-1500W drops out because its ordinary ADF is limited to 20; the one-card slot and single-sheet long-paper mode do not extend batch capacity. The current-reference ADS-4700W remains a larger-feeder option with an 80-sheet rating on its own stated basis. Check why the ADS-1500W no longer meets the threshold · Compare the ADS-4700W capacity evidence · Use the same 30-sheet threshold with earlier models included.
With the same earlier Wi-Fi/duplex/manual-feed conditions, raising the ADF minimum to 30 removes the ADS-1500W; the Canon DR-S350NW remains a documented Wi-Fi, special-original alternative with a 60-sheet ADF. Its special-media mode is not an extra tray, and this cited profile does not establish stock. Read the DR-S350NW paper-path limits · Open the exact 30-sheet Wi-Fi/manual-feed finder.
At that same earlier Wi-Fi/duplex/manual-feed combination and a 30-sheet minimum, the ADS-1200 remains outside because it has no Wi-Fi, and the ADS-2500We because its card mode does not provide a separate manual-feed route. Keep those exact conditions at 30 sheets.
The ADS-1700W leaves this same Wi-Fi/duplex/manual-feed combination at 30 sheets because its ADF is rated for 20 per loading; the separate card slot remains a one-card path, not a larger batch feeder. Open the same-condition finder with only the minimum raised to 30.
The RR-400W B11B270202 falls outside a 30-sheet minimum because its ADF holds 20 sheets on the stated 80 g/m² basis; its special straight path is not a larger ADF. The RR-70W remains below both stack-feeder thresholds at one sheet. Keep the 30-sheet minimum in the same-condition finder.
The SP-1130N and SP-1120N both remain above a 30-sheet minimum: each N-series unit has a 50-sheet ADF under the guide’s 80 g/m², 5 mm loading basis. Review the SP-1130N · review the SP-1120N · Keep the same 30-sheet minimum.
At a 50-sheet minimum, the SP-1425 PA03753-B005 is at its qualified ADF limit: 80 g/m² stock and a stack under 5 mm; the next selectable 60-sheet minimum excludes it. Read its paper and flatbed assessment · Keep the same 50-sheet threshold.
The FF-680W also clears a 50-sheet minimum on the detailed table's conservative Letter/21-lb 80-sheet value; this does not make its general 100-sheet claim a standard-stock guarantee. Keep the same 50-sheet threshold.
The ADS-4300N also clears a 50-sheet minimum on its stated 80-sheet ADF basis at 20 lb. Use the same 50-sheet threshold.
The DS-785W passes a 50-sheet minimum for Letter stock at 80 g/m²; its own model guide gives lower counts for heavier loads and Legal paper. Read the per-stock limit · Keep the 50-sheet condition.
The DS-410's 50-sheet figure is a real threshold only for the guide's Letter/21 lb (80 g/m²) load: it passes that minimum, but not 60 sheets. Epson also lists 70 at 13 lb, 30 at 35 lb and 15 at 56 lb, so the count must match the paper you intend to feed. Read the DS-410 capacity review and compare the same single-question finder at 50 or 60 sheets.
Answer: a 50-sheet minimum feeder capacity
The Epson U.S. WorkForce ES-400 II (B11B261201) qualifies at a 50-sheet minimum on its user guide's 50 sheets at 21 lb (80 g/m²); the next selectable 60-sheet minimum exceeds its documented ADF. This is a single-load paper capacity, not daily throughput or a mixed-stock guarantee.
The distinct ES-590W (B11B288202) also meets a 50-sheet minimum: Epson specifies up to 100 Letter sheets at 80 g/m² and lists lower limits for heavier or Legal-size paper. Its supported capacity depends on the loaded original, so verify the guide before a full batch.
The ES-500W II (B11B263201) qualifies exactly at 50 on its guide's 21 lb (80 g/m²) basis, then leaves at the next selectable 60-sheet minimum. Epson lists 43 sheets at 24 lb and 37 at 28 lb, so verify the stock rather than treating the headline as universal.
The exact TAA-labelled DS-530 II B11B261203 also meets 50 on the guide's 21 lb (80 g/m²) Letter basis, but drops out at 60. Its TAA mark does not change the feeder count or answer agency eligibility. Keep the 50-sheet threshold · raise the same requirement to 60.
The standard DS-870 B11B250201 passes a 50-sheet minimum on its documented Letter/21 lb (80 g/m²) 100-sheet rating; its workgroup feeder may be more than a short 50-sheet task needs. Read the DS-870 assessment · Keep the 50-sheet minimum.
The DS-1730 B11B273201 also meets a 50-sheet minimum on the specified 60-sheet at 80 g/m² basis; it is not a promise for other stocks or daily output. Read its ADF conditions · Keep a 50-sheet minimum.
Other newly reviewed Epson tiers above 50 are the 100-sheet DS-870 TAA/DS-970, the 120-sheet Normal-Mode DS-30000/DS-32000, and the 200-sheet DS-60000/DS-70000; the flatbed-only DS-50000 has no ADF capacity.
Open the finder with a 50-sheet minimum.
The DS-61000WN B11B283201 and DS-71000WN B11B284201 also meet this 50-sheet minimum on their exact-guide 150-sheet-at-80-g/m² ADF basis; stock and size still affect loading. Exact-model reviews: DS-61000WN B11B283201 · DS-71000WN B11B284201. Open the same-answer finder.
At 50 sheets, both the SP-1130N (PA03811-B025) and SP-1120N (PA03811-B005) are at their ADF limit; the guide’s load is qualified for 80 g/m² stock and a stack no thicker than 5 mm, so neither meets a 60-sheet minimum. Review the SP-1130N · review the SP-1120N · Use the same 50-sheet minimum.
Answer: the 45-sheet Canon DR-C225 II boundary
At a 40-sheet minimum with earlier models included, the Canon DR-C225 II passes on its documented 45-sheet ADF; the RS40 is a larger-load alternative only for A4-or-smaller paper under its manual's stated conditions.
At a 50-sheet minimum, the DR-C225 II's 45-sheet ADF fails while the RS40's 60-sheet A4-or-smaller loading limit can still qualify. This is a meaningful capacity step, not a daily-volume or paper-stock guarantee; confirm the exact feeder path and permitted stock.
Open the finder with earlier models and a 40-sheet minimum · Open it with the same era choice and a 50-sheet minimum.
Answer: an earlier 60-sheet USB duplex feeder
Brother's exact U.S. ADS-3300W support specification rates its ADF for 60 sheets using 20 lb paper in A4/Letter size. With earlier models included, it meets a 60-sheet minimum for USB-to-computer duplex capture and a required TWAIN driver, but it falls below the next 70-sheet setting. The capacity is one documented loading under the stated stock basis, not a daily workload or a mixed-paper guarantee. Read the ADS-3300W review · Open the same 60-sheet USB/duplex/TWAIN condition.
At 70 sheets, the ADS-3300W no longer meets this minimum; the earlier-inclusive ADS-4300N is one alternative with an 80-sheet ADF on Brother's stated 20 lb basis. Its remaining driver and paper-stock details still need model-specific checks. Keep the same USB/duplex/TWAIN requirements and raise only the minimum to 70.
Answer: raising the ADF minimum to 70 sheets
The FF-680W meets a 70-sheet minimum on the conservative 80-sheet Letter/21-lb manual-table value; other stocks still require a guide check. Use the same 70-sheet threshold.
The ADS-4300N remains above the 70-sheet minimum on its specified 80-sheet-at-20-lb basis; this does not promise the same capacity for every stock. Keep the same 70-sheet threshold.
The DS-785W clears 70 sheets only on its documented Letter/80 g/m² basis; Legal at that weight is rated for 80, and heavier Letter paper falls below 70 at listed weights above 104 g/m². Check the model's capacity table · Use the same 70-sheet threshold.
The Canon R30 and R50 also leave at this boundary: both are rated for 60 sheets, not 70, and the R30's legal-paper figure is 40.
The RS40 also leaves at 70: its manual sets 60 A4-or-smaller sheets and only 40 for larger-than-A4 paper. The LiDE 400 and LiDE 300 have no ADF and do not appear as capacity-qualified flatbeds.
At 70 sheets, the two reviewed Canon R40II configurations leave the set: each is rated for 60 sheets, even though one package adds a QuickBooks Online plug-in. The Brother ADS-4700W remains a reviewed 70-sheet option; do not confuse the stated per-load capacity with a daily duty rating or a guarantee for mixed paper stock.
The DR-C340 and DR-C350 remain above 70 with 100-sheet ADFs, but both fall out at 110.
The Epson ES-590W also clears 70 at the manual's 80 g/m² Letter capacity and remains eligible at 100 on that same basis; its load limits at heavier weights are lower.
Among the newly reviewed Epson DS units, the DS-530 II TAA leaves before 70 at its documented 50-sheet Letter/21 lb load. The 100-sheet DS-870 TAA and DS-970, 120-sheet Normal-Mode DS-30000 and DS-32000, and 200-sheet DS-60000/DS-70000 clear this threshold. The DS-50000 is not an ADF model.
Open the finder with a 70-sheet minimum.
The Epson DS-1760WN (B11B274201) leaves when the minimum rises from 60 to 70: its published ADF limit is 60 sheets at 80 g/m². Its separate platen does not raise the feeder count. Compare the 70-sheet minimum.
The standard DS-870 B11B250201 also meets a 70-sheet minimum on its documented Letter/21 lb (80 g/m²) basis; Legal and heavier stocks require lower loads. Review its exact ADF limits · Keep a 70-sheet minimum.
The DS-530X B11B286201 also clears 70 on the model guide's 100-sheet Letter/80 g/m² basis; Legal and heavier paper have lower listed counts. Review the exact stock table · Keep a 70-sheet minimum.
The DS-61000WN B11B283201 and DS-71000WN B11B284201 also meet this 70-sheet minimum on their exact-guide 150-sheet-at-80-g/m² ADF basis; stock and size still affect loading. Exact-model reviews: DS-61000WN B11B283201 · DS-71000WN B11B284201. Open the same-answer finder.
Answer: raising the ADF minimum to 110 sheets
The standalone base fi-7700 remains above a 110-sheet minimum for Letter/A4-or-smaller paper on its 300-sheet, 80 g/m² basis; PFU's shared guide limits larger originals to 100 sheets. This is a size-specific per-load figure, not throughput. Keep the same 110-sheet requirement.
Raising the minimum to 110 removes the DS-785W B11B288201: its documented Letter/80 g/m² maximum is 100 sheets per load, not 110. Review the capacity boundary · Keep the same 110-sheet requirement.
The Canon RS40's specified 60-sheet A4-or-smaller maximum is below this threshold; its separately reported photo load does not count as ADF paper capacity.
The 100-sheet DR-C340 and DR-C350 also leave at 110: neither published ADF reaches this minimum. This is a feeder-capacity boundary, not a statement about their daily scan recommendations.
The Epson ES-590W also leaves at 110: its maximum 100-sheet load is specified for Letter paper at 80 g/m² with a stack below 12 mm, and the guide lists smaller loads for heavier media.
The standard DS-730N B11B259201's stated 100-sheet ADF falls below a 110-sheet minimum; its separate product-page daily-duty conflict cannot change the per-load capacity.
The DS-870 TAA and DS-970 also leave at 110 because each has a 100-sheet ADF. The DS-30000 and DS-32000 remain at their 120-sheet Normal-Mode capacity; at 130 they leave too. The 200-sheet DS-60000 and DS-70000 remain above this threshold. Each number is a per-load figure on a stated stock basis.
At a 110-sheet minimum, the fi-7600 and fi-7700 FADGI bundles also match: both retain a documented 300-sheet ADF, although only the fi-7700 adds a separate 12-by-18-inch flatbed. The fi-8820, fi-8930, and fi-8950 scanner models meet the threshold, as do the distinct fi-8820, fi-8930 and fi-8950 FADGI packages. The fi-8820 bundle keeps its 500-sheet chassis; the other two use matching 750-sheet base scanners. No service package increases its feeder capacity. Their published ADF capacities are not a promise of daily throughput. Compare the Ricoh fi-8820 and Ricoh fi-8930, and confirm the original formats and loading conditions that matter to your batches.
Open the finder with a 110-sheet minimum.
At 110 sheets, the standard DS-870 B11B250201 leaves the candidate set: its documented maximum is 100 Letter sheets at 21 lb (80 g/m²), with 80 Legal sheets on that same weight basis. See the exact model's loading limits · Keep the 110-sheet minimum.
The DS-530X B11B286201 also leaves at 110: its DS-530X-specific guide lists 100 Letter sheets at 80 g/m², with only 80 Legal sheets at that weight. A larger feeder such as the reviewed DS-30000 remains a different candidate; confirm its larger size and workflow fit. Keep the same 110-sheet minimum.
The DS-61000WN B11B283201 and DS-71000WN B11B284201 also meet this 110-sheet minimum on their exact-guide 150-sheet-at-80-g/m² ADF basis; stock and size still affect loading. Exact-model reviews: DS-61000WN B11B283201 · DS-71000WN B11B284201. Open the same-answer finder.
Answer: the 200-sheet questionnaire maximum
The standalone base fi-7600 and fi-7700 both clear a 200-sheet minimum on PFU's 300-sheet Letter/A4-or-smaller loading basis at 80 g/m². For either chassis, the shared guide limits larger-than-Letter/A4 originals to 100 sheets at that weight, with a separate stack-height limit. The current U.S. fi-8700 also clears this minimum: its U.S. datasheet rates the ADF at up to 300 A4/Letter sheets on a 20 lb / 80 g/m² basis and says capacity varies with document thickness. Its distinct flatbed and large-format capability do not raise that ADF loading limit. Read the fi-8700's ADF and flatbed assessment · Keep the same 200-sheet minimum in the finder.
The V19 II and V39 II likewise stay out at 200 because neither exact model has an ADF; the flatbed's largest scan area is not a feeder capacity. Keep the same 200-sheet minimum.
The RS40 is below 200 sheets, and the two CanoScan LiDE flatbeds have no ADF capacity.
The current-reference Epson DS-60000 and DS-70000 also meet the questionnaire's 200-sheet maximum minimum on the user-guide basis of approximately 20 lb (80 g/m²) ADF paper. The DS-30000/DS-32000 120-sheet feeders and 100-sheet DS-870/DS-970 models remain below it; the flatbed-only DS-50000 has no ADF value. Confirm original size and stock before treating the stated maximum as a load plan.
At the largest minimum this finder accepts, the fi-7600 FADGI and fi-7700 FADGI packages remain because their shared chassis feeder is rated for 300 sheets on specified Letter/A4 stock. The 500-sheet fi-8820 and fi-8820 FADGI bundle, plus standard and FADGI fi-8930 and fi-8950 models, also clear 200. By contrast, a 100-sheet scanner no longer matches. This questionnaire stops at 200, below the two models' 300-sheet rated loading capacity; that rating is not a workload or throughput guarantee, and media thickness can change the stack limit.
Open the finder at its 200-sheet maximum minimum.
The DS-61000WN and DS-71000WN are not 200-sheet matches: both exact guides specify a 150-sheet load at 80 g/m². Exact-model reviews: DS-61000WN B11B283201 · DS-71000WN B11B284201. Open the same-answer finder.
At the earlier=yes USB, duplex and manual-feed minima of 60, 70, 80, 100 and 110 sheets, the four G2110/G2140 variants also remain: their 500-sheet A4-or-smaller rating exceeds each threshold and the shared manual documents a distinct manual-feed mode. Above-A4 load is limited to 200. Compare the Ethernet G2110 with the G2110USB, and the Ethernet G2140 with G2140USB. The DR-X10C II is not counted because its manual-feed tag is unknown, not because its listed ADF is below these thresholds.
At an 80-sheet minimum, both fi-6400 and fi-6800 meet earlier=yes, USB, duplex and separate manual feed; their qualified capacity is up to 500 A4/Letter sheets at 80 g/m² (20 lb), with stock and loading conditions applying. fi-6400 review · fi-6800 review · Keep the exact 80-sheet answers together.
The FF-680W is excluded from both earlier-inclusive USB/duplex/manual-feed cases at 70 and 80 sheets: its ADF threshold covers those loads, but Epson does not document a separate manual-feed route. 70-sheet same-condition finder · 80-sheet same-condition finder.
The ADS-4300N also satisfies the earlier-inclusive USB/duplex/manual-feed cases at 70 and 80 sheets: its documented 80-sheet ADF clears those minimums, and Manual Single Mode remains limited to supported one-at-a-time originals. 70-sheet finder · 80-sheet finder.
The six current-reference Epson models DS-870 TAA, DS-970, DS-30000, DS-32000, DS-60000 and DS-70000 retain enough stated ADF capacity at both 70 and 80 sheets when earlier=yes, USB, duplex and manual feed are held constant. The DS-530 II TAA leaves at 60 because its exact guide supports 50 Letter sheets at 21 lb (80 g/m²); the six above are rated 100, 120 or 200 under their stated paper conditions. 70-sheet same-condition finder · 80-sheet same-condition finder.
At 80 sheets, the four separate DR-G2110/DR-G2140 configurations also match with their documented manual-feed mode and 500-sheet A4-or-smaller ADF; above-A4 loading is limited to 200 sheets.
Interaction: earlier USB duplex models with special-feed procedures at 70 and 80 sheets
At 70 sheets, all four individually reviewed Canon DR-M profiles—the DR-M1060II, DR-M140II, DR-M160II and DR-M260—fit this earlier=yes, USB, duplex and manual-feed requirement. Their evidence-based ADF capacities are 80, 80, 75 and a conservative 80 sheets; Canon's exact manuals describe separate special-original or non-separation procedures, not a second physical ADF tray. These are route-specific instructions, so confirm the stock and path for your original. The DR-M1060II is the wide-format model, the DR-M140II has a straight-through path, the DR-M160II has a 75-sheet limit, and the DR-M260 is scored conservatively at 80 because its manual/brochure and U.S. page disagree.
The earlier DR-G2090 USB also remains in the 70- and 80-sheet versions of this combined USB, duplex and manual-feed result: the exact model has a 300-sheet ADF and manual-feed modes, with USB-only host capture, no LAN/Wi-Fi, and a 118.1-inch long-document ceiling. Its 55.1 lb production body and discontinued/no-longer-available status make host, driver, stock-path and package checks essential.
Open the finder with earlier models, USB, duplex, manual feed, and a 70-sheet minimum.
At 80 sheets, the DR-M1060II, DR-M140II and DR-M260 remain above the selected minimum, while the DR-M160II's 75-sheet ADF falls short; the matcher does not promote the U.S. page's conflicting 90-sheet DR-M260 figure over the manual's 80-sheet value. The exact model-specific procedures and package caveats remain in each review.
Open the same earlier USB, duplex and manual-feed finder at an 80-sheet minimum.
The Epson DS-1760WN (B11B274201) does not qualify for this required manual-feed condition. Its glass is an alternative platen, not a separately selected ADF manual-feed mode; depending on the selected minimum it may also fall short of 60 sheets. earlier-inclusive 80-sheet manual-feed finder.
The DS-61000WN and DS-71000WN meet these USB/duplex/capacity conditions, but all three do not have the separately documented manual-feed path required here. Exact-model reviews: DS-51000WN B11B277201 · DS-61000WN B11B283201 · DS-71000WN B11B284201. Open the same-answer finder.
At a 60-sheet minimum, both fi-6400 and fi-6800 meet earlier=yes, USB, duplex and separate manual feed; their qualified capacity is up to 500 A4/Letter sheets at 80 g/m² (20 lb), with stock and loading conditions applying. fi-6400 review · fi-6800 review · Keep the exact 60-sheet answers together.
At a 70-sheet minimum, both fi-6400 and fi-6800 meet earlier=yes, USB, duplex and separate manual feed; their qualified capacity is up to 500 A4/Letter sheets at 80 g/m² (20 lb), with stock and loading conditions applying. fi-6400 review · fi-6800 review · Keep the exact 70-sheet answers together.
The FF-680W meets the 60- and 70-sheet feeder minima on the conservative table value but is excluded from these earlier-inclusive USB/duplex/manual-feed cases because no separate manual-feed path is documented. 60-sheet finder · 70-sheet finder.
The current-reference ADS-4300N remains a match at the 60- and 70-sheet earlier-inclusive USB/duplex/manual-feed steps: its 80-sheet ADF meets both, while Manual Single Mode remains a limited one-at-a-time route. 60-sheet finder · 70-sheet finder.
The TAA DS-530 II meets the earlier=yes USB/duplex/TWAIN 50-sheet boundary elsewhere in this guide, but is absent from this 60-sheet manual-feed set because its exact guide does not establish a separate manual-feed selector.
The DS-1730 B11B273201 does not fit this 60-sheet earlier=yes USB/duplex/manual-feed combination: its glass is a separate source, not a separately selected manual-feed path for the ADF; the feeder itself has a 60-sheet 80 g/m² basis. Read the ADF-versus-flatbed distinction · Keep all five requirements in the finder.
The current-reference DS-30000 and DS-32000 also pass the earlier=yes USB/duplex/manual-feed requirements at both 60 and 70 sheets through their 120-sheet Normal-Mode ADF and separately documented Manual Feed selector. 60-sheet finder · 70-sheet finder.
The four DR-G2110/DR-G2140 configurations also pass both the 60- and 70-sheet earlier USB, duplex and manual-feed minima: their documented alternate feed mode and 500-sheet A4-or-smaller capacity clear those thresholds, while above-A4 loading is limited to 200 sheets.
Interaction: the 60-sheet earlier USB duplex boundary
At a 60-sheet minimum, the earlier Canon DR-S350NW and DR-S250N join the USB, duplex and special-feed results; both are rated for 60 A4-or-smaller sheets but only 40 above A4, while the standalone ScanFront 400 does not meet USB-to-computer.
The Canon DR-G2090 USB also clears both the 60- and 70-sheet versions of this earlier USB, duplex and manual-feed interaction: its exact configuration has a 300-sheet ADF and documented manual and continuous-manual modes, but is a 55.1 lb USB-only production unit with no LAN or Wi-Fi. The long-document limit is 118.1 inches and Canon's exact U.S. page says discontinued/no longer available, so verify legacy host/driver support and package condition.
Open the finder with earlier models, USB, duplex, manual feed, and a 60-sheet minimum.
The earlier Canon DR-S350NW and DR-S250N fall out at 70 sheets: each tops out at 60 A4-or-smaller originals and 40 above A4; the DR-M1060II and DR-M140II are examples of 80-sheet earlier USB duplex feeders with special-original procedures.
Compare the same requirements at a 70-sheet minimum.
The Epson DS-1760WN (B11B274201) does not qualify for this required manual-feed condition. Its glass is an alternative platen, not a separately selected ADF manual-feed mode; depending on the selected minimum it may also fall short of 60 sheets. earlier-inclusive 60-sheet manual-feed finder.
The DS-61000WN and DS-71000WN meet the USB, duplex and 60-sheet ADF portions; all three remain excluded because a separate manual-feed mode is not established. Exact-model reviews: DS-51000WN B11B277201 · DS-61000WN B11B283201 · DS-71000WN B11B284201. Open the same-answer finder.
At a 100-sheet minimum, both fi-6400 and fi-6800 meet earlier=yes, USB, duplex and separate manual feed; their qualified capacity is up to 500 A4/Letter sheets at 80 g/m² (20 lb), with stock and loading conditions applying. fi-6400 review · fi-6800 review · Keep the exact 100-sheet answers together.
The Perfection V19 II and V39 II are excluded from earlier=yes, USB, duplex, separate manual feed and a 100-sheet minimum: the glass is their only original source, with no automatic duplex, separate feed mode or ADF capacity. Open the same earlier-inclusive paper combination.
The photo/document FF-680W is outside this earlier-inclusive USB/duplex/manual-feed/100-sheet combination for two independent reasons: the detailed Letter/21-lb table supports 80 sheets, and no separate manual-feed route is documented. Keep the same five answers in the finder.
The current-reference DS-30000 and DS-32000 also meet this earlier=yes USB/duplex/manual-feed 100-sheet case through their 120-sheet Normal-Mode ADF and documented Manual Feed selector. Open the same 100-sheet finder setup.
The current-reference DS-70 and DS-80W are excluded from the earlier=yes USB/duplex/manual-feed 100-sheet combination: both are simplex with one-sheet input and no separate manual-feed mode.
At this 100-sheet minimum, the four DR-G2110/DR-G2140 configurations also match the earlier USB, duplex and manual-feed requirements: each has a documented alternate feed mode and 500-sheet A4-or-smaller ADF, with larger-than-A4 loads capped at 200 sheets.
Interaction: earlier models, USB, duplex, manual feed, and 100 sheets
With earlier=yes, USB capture, duplex, a separate manual-feed route and a 100-sheet minimum, the historical fi-7800 and fi-7900 FADGI bundles match on 500-sheet chassis; the 100-sheet fi-8190 and fi-8290 packages also remain at this threshold. See the direct fi-7800 assessment, fi-7900 assessment, fi-8190 assessment and fi-8290 assessment. The fi-8290 also has a separate flatbed. PFU's fi-7800 datasheet and fi-7900 datasheet are dated package references, not current seller offers. Both chassis are marked discontinued, their service and target contents must be verified for any offer, and a 500-sheet loading rating is neither daily throughput nor proof of records conformance.
The earlier Canon DR-G2090 USB also meets this 100-sheet minimum with a 300-sheet duplex ADF and manual-feed modes. It is a USB-only, 55.1 lb production scanner with no LAN/Wi-Fi; Canon marks the exact U.S. SKU discontinued/no longer available and the manual limits long-document mode to 118.1 inches.
The Canon RS40 is below this 100-sheet condition with its 60-sheet A4-or-smaller load; both LiDE flatbeds lack automatic duplex and ADF capacity.
Open the finder with earlier=yes, USB, duplex, manual feed, and a 100-sheet minimum.
The Epson DS-1760WN (B11B274201) does not qualify for this required manual-feed condition. Its glass is an alternative platen, not a separately selected ADF manual-feed mode; depending on the selected minimum it may also fall short of 60 sheets. earlier-inclusive 100-sheet manual-feed finder.
The DS-61000WN and DS-71000WN meet the 100-sheet ADF, USB, duplex and TWAIN portions, but all three A3 models fail the selected manual-feed requirement. Exact-model reviews: DS-51000WN B11B277201 · DS-61000WN B11B283201 · DS-71000WN B11B284201. Open the same-answer finder.
At a 110-sheet minimum, both fi-6400 and fi-6800 meet earlier=yes, USB, duplex and separate manual feed; their qualified capacity is up to 500 A4/Letter sheets at 80 g/m² (20 lb), with stock and loading conditions applying. fi-6400 review · fi-6800 review · Keep the exact 110-sheet answers together.
Raising the same earlier USB/duplex/manual-feed minimum to 110 does not change the Perfection V19 II/V39 II result: neither model has the required separate feed path or a rated ADF load. Keep those exact choices at 110 sheets.
The FF-680W remains outside the earlier-inclusive USB/duplex/manual-feed/110-sheet setup: the conservative Letter/21-lb basis is 80 sheets and the special-original steps are not a separate feed path. Keep the same five conditions at 110.
The current-reference DS-30000 and DS-32000 remain at 110 in this earlier=yes USB/duplex/manual-feed setup because each lists 120 sheets in Normal Mode; both leave at 130. Open the same 110-sheet finder setup.
At this 110-sheet minimum, the four DR-G2110/DR-G2140 configurations also match the earlier USB, duplex and manual-feed requirements: each has a documented alternate feed mode and 500-sheet A4-or-smaller ADF, with larger-than-A4 loads capped at 200 sheets.
Interaction: the same earlier-model paper setup at 110 sheets
Raising the same earlier=yes USB, duplex and manual-feed routine to a 110-sheet minimum removes the 100-sheet fi-8190 and fi-8290 FADGI packages, while the 500-sheet fi-7800 and fi-7900 packages remain. Direct assessments: fi-7800, fi-7900, fi-8190, fi-8290, fi-7600, fi-7700. The 300-sheet fi-7600 and fi-7700 and the 500-sheet fi-8820 family also remain above this feeder boundary. These capacity figures describe one ADF loading on specified stock; they do not upgrade daily-volume guidance or make the older 7800/7900 service package currently orderable. Confirm the exact part, service term and media path before relying on it.
The Canon DR-G2090 USB also qualifies at the 110-sheet minimum with its 300-sheet ADF, duplex capture and documented manual-feed modes. It remains USB-only and weighs 55.1 lb; its long-document ceiling is 118.1 inches, and Canon lists this exact U.S. SKU as discontinued/no longer available.
The RS40 remains below 110 at 60 A4-or-smaller sheets; neither CanoScan LiDE flatbed has duplex or ADF capacity.
Open the same finder setup at a 110-sheet minimum.
The Epson DS-1760WN (B11B274201) does not qualify for this required manual-feed condition. Its glass is an alternative platen, not a separately selected ADF manual-feed mode; depending on the selected minimum it may also fall short of 60 sheets. earlier-inclusive 110-sheet manual-feed finder.
The DS-61000WN and DS-71000WN have 150-sheet ADFs but all three still fail the separately selected manual-feed condition; glass use does not qualify. Exact-model reviews: DS-51000WN B11B277201 · DS-61000WN B11B283201 · DS-71000WN B11B284201. Open the same-answer finder.
Interaction: earlier USB duplex at the 200-sheet minimum
At the selectable 200-sheet minimum, both fi-6400 and fi-6800 meet earlier=yes and duplex; each is specified for up to 500 A4/Letter sheets at 80 g/m² (20 lb), a qualified load rather than a daily scan rate. The separate fi-5650C also matches this earlier/USB/duplex combination on its published 200-sheet maximum, which is stated for A4 stock rather than an A3 load; current host compatibility remains unestablished. The fi-5750C is a further exact USB/duplex match at 200 sheets on its qualified A4-or-smaller basis; for originals over A4 its guide cuts the load to 100, and the separate flatbed does not raise the ADF limit. Its historical driver sources do not prove present host compatibility. fi-6400 review · fi-6800 review · fi-5650C review · fi-5750C review · Keep earlier, USB, duplex and the 200-sheet minimum together.
The current-reference base fi-7600 also qualifies with earlier=yes, USB, duplex and a 200-sheet minimum: its 300-sheet load is for Letter/A4-or-smaller stock, while the larger-than-Letter/A4 limit is 100. Keep the same four conditions in the finder.
With earlier=yes, USB and duplex required at the finder's largest 200-sheet minimum—but no manual-feed requirement—the four G-series product cards and the distinct DR-X10C II meet Canon's 500-sheet ADF figure on its specified stock. For the G2110/G2140, the shared manual caps larger-than-A4 loading at 200 sheets, so 500 is not a promise for every page size or paper mix. The G2110 pair is rated at 110/220 ppm/ipm; the G2140 pair at 140/280. Within each pair, the network SKU includes wired Ethernet and its USB-suffix version is USB-only. Read the DR-G2110, DR-G2110USB, DR-G2140, DR-G2140USB and DR-X10C II reviews for their exact host and support boundaries. The X10C II uses SCSI-III/USB 2.0; its separate manual-feed and touchscreen capabilities were not confirmed.
The current-reference Epson DS-60000 and DS-70000 also meet the exact earlier=yes, USB, duplex and 200-sheet minimum when manual feed is not required; their hybrid ADF/platen configuration has a 200-sheet feeder. The earlier=yes choice does not remove current-reference products. Keep this same 200-sheet finder condition.
Without a manual-feed condition, the Epson DS-1760WN (B11B274201) still falls out of this 200-sheet case: its ADF is rated for 60 sheets at 80 g/m², not 200. Open the same USB/duplex 200-sheet finder.
The DS-61000WN and DS-71000WN fall below this 200-sheet minimum at 150 sheets; DS-51000WN has no ADF, so none of these three is a match. Exact-model reviews: DS-51000WN B11B277201 · DS-61000WN B11B283201 · DS-71000WN B11B284201. Open the same-answer finder.
Interaction: the maximum ADF minimum with an earlier USB production feeder
At the selectable 200-sheet minimum, both fi-6400 and fi-6800 meet earlier=yes, USB, duplex and separate manual feed; each is specified for up to 500 A4/Letter sheets at 80 g/m² (20 lb), a qualified load rather than a daily scan rate. fi-6400 review · fi-6800 review · Keep the same answers at the 200-sheet minimum.
With earlier=yes, USB, duplex, separate manual feed and a 200-sheet minimum, the current-reference base fi-7600 is another match; its 300-sheet load is for Letter/A4-or-smaller paper, and larger-than-Letter/A4 loads are limited to 100. Keep all five conditions in the finder.
At the finder's largest 200-sheet minimum, the earlier Canon DR-G2090 USB still qualifies when USB, duplex and manual-feed modes are required: its model-specific ADF maximum is 300 sheets, not the 500-sheet setting available on the G2110/G2140 siblings. This is one-load capacity on supported stock, not daily duty or proof that every original is suitable; check the USB host and software, the 118.1-inch long-document limit, and the exact used unit's condition and package.
The four G2110/G2140 cards also pass the same exact manual-feed combination at 200: each one has a documented G-series special-feed procedure and a 500-sheet A4-or-smaller load (200 sheets maximum above A4). The USB-only and Ethernet-capable variants are not merged, and each exact U.S. page is marked discontinued. The DR-X10C II is excluded from this manual-feed condition because its manual is unavailable; Canon's brief “Automatic or Manual” label alone does not establish the finder's separate occasional-special-original route.
The current-reference DS-30000 and DS-32000 fall below this 200-sheet manual-feed combination at their 120-sheet Normal-Mode capacity. The DS-60000 and DS-70000 meet 200 sheets but do not document the separately selected Manual Feed route required here, so none of those four Epson profiles joins this exact query.
Open the finder with earlier models, USB, duplex, manual feed, and its maximum 200-sheet minimum.
The Epson DS-1760WN (B11B274201) does not qualify for this required manual-feed condition. Its glass is an alternative platen, not a separately selected ADF manual-feed mode; depending on the selected minimum it may also fall short of 60 sheets. earlier-inclusive 200-sheet manual-feed finder.
None of these three matches this case because the DS-51000WN has no ADF and the two ADF models are rated at 150 sheets, below the 200-sheet minimum. Exact-model reviews: DS-51000WN B11B277201 · DS-61000WN B11B283201 · DS-71000WN B11B284201. Open the same-answer finder.
Interaction: a 20-sheet duplex stack and one special card path
The V19 II and V39 II are not alternatives in this USB/duplex/manual-feed/20-sheet combination: their platen handles one manually positioned original, but neither has an ADF, automatic duplex or separate special-feed route. Keep all four exact requirements.
The FF-680W does not meet this USB/duplex/manual-feed combination: its supported special originals still use the ordinary input tray and no separate manual-feed path is documented. Keep the same 20-sheet USB/duplex/manual-feed answers.
The ADS-4300N also meets this USB/duplex/manual-single combination: the special mode uses its ADF and the normal tray holds 80 sheets. This is not a second tray, and multifeed detection is disabled in manual mode. Keep all four conditions selected.
With USB, duplex, manual-feed support and a 20-sheet minimum all required, the Canon R10 Red matches through its 20-sheet duplex ADF and separate one-at-a-time slot for supported plastic cards. That narrow card route does not mean a 20-sheet card stack, general envelope support or permission to send embossed cards through the ADF; inspect the manual and test a replaceable original first. The Ricoh fi-8150 is a different model with its own documented manual-feed route.
The Canon RS40 also matches these quiz requirements at 20 sheets with USB duplex and the manufacturer's manual-feed table entry; it is rated for 60 A4-or-smaller sheets and its media caveats still apply. It does not match the 100- or 110-sheet versions of this interaction. The two LiDE flatbeds do not have duplex or an ADF.
The ES-500W II is excluded from this same 20-sheet combination despite its USB, duplex and TWAIN features: the guide does not establish a separate manual-feed route.
With earlier=no, USB, duplex, manual feed and a 20-sheet minimum, the current-reference ES-C320W (B11B270201) also fits through its limited straight-path special-original route; its ADF is rated at 20 sheets of 21 lb (80 g/m²) paper.
With earlier=no, USB, duplex, manual feed and a 20-sheet minimum, the current-reference ES-C220 (B11B272202) also fits its documented one-at-a-time straight-path route; the normal ADF is 20 sheets at 21 lb (80 g/m²), and passport work needs an optional compatible carrier.
The current-reference ES-C380W (B11B269201) also fits USB, duplex, a 20-sheet minimum and its limited straight-path route for supported booklets/passports; that route handles special originals individually, not as another batch tray.
For the Epson DS-C330 (B11B272201), DS-C480W (B11B269202), and DS-C490 (B11B271201), this USB/duplex/manual-feed 20-sheet combination passes; the standard ADF load is 20 sheets at 21 lb (80 g/m²), not a larger straight-path batch. The C480W's panel and Wi-Fi routes are optional alternatives, not a separate manual-feed capacity.
The portable DS-70 and DS-80W do not meet this USB/duplex/manual-feed 20-sheet combination: both are simplex one-sheet models without a separately documented manual-feed path.
The DS-30000 and DS-32000 also pass this USB/duplex/manual-feed 20-sheet combination: both have one-pass duplex, a 120-sheet Normal-Mode ADF and a distinct selector-based Manual Feed route; DS-32000 Delicate Mode separately reduces Letter/A4 capacity to 20.
Open the finder with USB, duplex, manual feed and 20 sheets required.
The Epson DS-1760WN (B11B274201) does not qualify for this required manual-feed condition. Its glass is an alternative platen, not a separately selected ADF manual-feed mode; depending on the selected minimum it may also fall short of 60 sheets. 20-sheet USB/manual-feed finder.
None of these three models supplies the requested separately documented manual-feed route; their A3 glass (51000WN) or ADF-plus-glass workflow (61000WN/71000WN) is a distinct capture path. Exact-model reviews: DS-51000WN B11B277201 · DS-61000WN B11B283201 · DS-71000WN B11B284201. Open the same-answer finder.
Interaction: duplex, manual feed, and 100-sheet capacity
The FF-680W does not meet this duplex/manual-feed/100-sheet case: its detailed Letter/21-lb loading table gives an 80-sheet limit, and its special-original procedures do not establish a separate manual-feed path. Keep the same duplex/manual-feed/100-sheet requirements.
A duplex stack, an occasional manual-feed original, and a 100-sheet loading threshold can coexist on assessed choices such as the fi-8150, hybrid fi-8250, iX2500, the fi-8190 FADGI bundle, fi-8290 FADGI package, new fi-7600 and fi-7700 bundles, fi-8820 FADGI bundle, and the fi-8950/fi-8930 FADGI bundles; a large feeder claim alone does not establish every special-paper route. With duplex, manual feed and a 100-sheet minimum, the fi-7600 and fi-7700 packages match through their documented 300-sheet scanner chassis, with the fi-7700 adding a distinct 12-by-18-inch flatbed; the fi-8190 and fi-8290 packages remain matches at 100. Calibration and service add no feeder capacity or special-media permission. The fi-8820 bundle keeps the 500-sheet fi-8820 chassis, while the fi-8930 and fi-8950 packages use their 750-sheet models. Each service layer adds neither feeder capacity nor expanded media permissions. The fi-8250's flatbed is a separate page-by-page mechanism, not a larger feeder.
The Canon RS40 does not satisfy a 100-sheet minimum: its manual sets 60 A4-or-smaller sheets and 40 for larger-than-A4 paper. The LiDE 400 and LiDE 300 have neither automatic duplex nor an ADF.
The DS-30000 and DS-32000 also meet this duplex/manual-feed/100-sheet threshold: each lists 120 sheets in Normal Mode and a distinct supported special-original selector setting. Their Manual Feed position is not a second batch tray, and DS-32000 Delicate Mode is only 20 Letter/A4 sheets. Run these same 100-sheet requirements in the finder.
Open the finder with duplex, manual feed, and a 100-sheet minimum all required.
The Epson DS-1760WN (B11B274201) does not qualify for this required manual-feed condition. Its glass is an alternative platen, not a separately selected ADF manual-feed mode; depending on the selected minimum it may also fall short of 60 sheets. 100-sheet duplex/manual-feed finder.
With duplex, a separate manual-feed path and at least 100 sheets all required, the DS-870 B11B250201 is excluded because its Automatic Feeding Mode is not a distinct manual-feed route. Read the DS-870 feed-path review · Test the same 100-sheet combination.
The DS-51000WN, DS-61000WN and DS-71000WN do not satisfy the separate manual-feed requirement: the platen and sequential ADF/glass process are not documented manual-feed modes. Exact-model reviews: DS-51000WN B11B277201 · DS-61000WN B11B283201 · DS-71000WN B11B284201. Open the same-answer finder.
Interaction: the same paper requirements at 110 sheets
The FF-680W is not a 110-sheet duplex/manual-feed match: the detailed Letter/21-lb table gives an 80-sheet conservative load and Epson does not document a separate manual-feed route. Keep the same three requirements at 110.
Raising that same combined paper requirement to 110 sheets still admits the fi-7600 and fi-7700 FADGI packages through their 300-sheet chassis, alongside the fi-8820, fi-8930, and fi-8950 scanner models plus distinct fi-8820, fi-8950 and fi-8930 packages. The fi-8820 bundle shares its 500-sheet scanner chassis; the other production units use 750-sheet models. None adds feeder capacity or special-media permissions. Confirm original compatibility, loading instructions, and workload guidance separately. The fi-8820 and standard fi-8950 remain useful scanner comparisons.
The RS40 is below this 110-sheet threshold at 60 A4-or-smaller sheets; the LiDE 400 and LiDE 300 are flatbeds without duplex or ADF capacity.
The DS-30000 and DS-32000 remain at the 110-sheet duplex/manual-feed threshold because each has a 120-sheet Normal-Mode ADF; a 130-sheet requirement removes them. The DS-32000's Delicate Mode is only 20 Letter/A4 sheets. Open the identical 110-sheet finder.
Open the finder with duplex, manual feed, and a 110-sheet minimum all required.
The Epson DS-1760WN (B11B274201) does not qualify for this required manual-feed condition. Its glass is an alternative platen, not a separately selected ADF manual-feed mode; depending on the selected minimum it may also fall short of 60 sheets. 110-sheet duplex/manual-feed finder.
At a 110-sheet minimum, the DS-870 B11B250201 also fails the duplex/manual-feed combination: the 100-sheet Letter ADF is below the selected capacity and its Automatic Feeding Mode is not a separate manual-feed route. Check the exact feeder and special-original limits · Test the same 110-sheet combination.
The DS-51000WN, DS-61000WN and DS-71000WN still do not satisfy the separate manual-feed requirement; neither raising the ADF minimum nor using the glass creates a manually selected feed route. Exact-model reviews: DS-51000WN B11B277201 · DS-61000WN B11B283201 · DS-71000WN B11B284201. Open the same-answer finder.
Interaction: earlier USB duplex and a 30-sheet minimum
At a 30-sheet minimum with earlier=yes, USB, duplex and manual feed required, the fi-6130Z, fi-6130, fi-6230Z, fi-6230 and fi-6240Z join the result alongside higher-capacity models. Each has a documented sheet-by-sheet Manual Feeding mode through the ADF and a paper-qualified 50-sheet load; fi-6230, fi-6230Z and fi-6240Z also add separate flatbeds, which do not raise ADF capacity. The fi-6240Z guide warns that paper protection is disabled in Manual Feeding. The 50-sheet group meets 20- and 30-sheet minima but leaves when the requirement rises to 60. fi-6130Z · fi-6130 · fi-6230Z · fi-6230 · fi-6240Z · Keep all five answers at 30 sheets.
At the 20-sheet minimum, both ADS-1000W and ADS-4300N enter this earlier-inclusive USB/duplex/manual-feed set, but their extra path differs: the older ADS-1000W has a rear slot for supported cards, while the ADS-4300N has a one-at-a-time Manual Single Mode for supported media. The 20-sheet and card/special-original limits do not make those routes interchangeable. At 30 sheets, the ADS-1000W falls out because its exact 20-sheet ADF is below the selected minimum, while the 80-sheet ADS-4300N still passes. 20-sheet same-condition finder · Compare at 30 sheets.
With earlier=yes, USB, duplex, separate manual feed and a 20-sheet ADF minimum, the Epson DS-320 also qualifies: its distinct card slot takes one supported plastic card, while its paper ADF holds 20 sheets at 80 g/m² (25 at 64 g/m² and 12 at 128 g/m²). Raising only this minimum to 30 sheets removes the DS-320 because its ADF ceiling on the 80 g/m² basis is 20; the one-card slot is not a paper batch feeder. Review the DS-320's card and stock limits · Open the exact 20-sheet finder · Open the same conditions at 30 sheets.
With earlier=yes, USB, duplex and manual feed required at 20 sheets, the P-215II can match through its dedicated one-card slot, while the P-208II fails both its separate-route and capacity conditions.
At a 30-sheet minimum under the same earlier=yes, USB, duplex and manual-feed requirements, neither the P-208II nor the P-215II qualifies because their ADFs hold only 10 and 20 sheets respectively. A larger earlier USB feeder such as the DR-M1060II remains in the broader results. The fi-6400 and fi-6800 also remain eligible through their qualified 500-sheet ADFs and one-original-at-a-time Manual Feed Mode; the two interfaces are distinct designs, not a shared wireless path. The finder still returns every other reviewed model for each exact answer set; these two portables are a comparison, not the whole result set.
At the 20-sheet minimum with earlier=yes, USB, duplex and manual feed, the current-reference ES-C380W (B11B269201) remains in the result through its narrowly limited straight-path special-original mode; the current-reference ES-C320W (B11B270201) also fits through its limited straight-path special-original route, with ADF capacity rated at 20 sheets of 21 lb (80 g/m²) paper.
At that same 20-sheet threshold, the current-reference ES-C220 (B11B272202) remains eligible through its limited one-at-a-time straight-path route and 20-sheet ADF at 21 lb (80 g/m²); this does not make special-original handling a larger batch.
For the Epson DS-C330 (B11B272201), DS-C480W (B11B269202), and DS-C490 (B11B271201), this earlier=yes USB/duplex/manual-feed 20-sheet combination also passes; the straight path handles one supported original at a time and does not increase the 20-sheet ADF limit.
At the 30-sheet minimum with earlier=yes, USB, duplex and manual feed, the ES-C380W (B11B269201) leaves at its 20-sheet ADF maximum, and the ES-C320W (B11B270201) also drops out; neither straight-path special-original route adds batch capacity.
At 30 sheets with those same earlier=yes USB, duplex and manual-feed conditions, the ES-C220 (B11B272202) also leaves: its ADF is capped at 20 sheets at 21 lb (80 g/m²), and its straight-path special-original route does not add batch capacity.
The DS-C330, DS-C480W and DS-C490 also leave this earlier=yes combination at 30 sheets: each has a maximum 20-sheet ADF on the 21 lb (80 g/m²) basis, and none's straight path adds batch capacity.
The current-reference DS-30000 and DS-32000 also meet the earlier=yes USB/duplex/manual-feed combination at both 20- and 30-sheet minima: each is a 120-sheet Normal-Mode duplex scanner with a separate special-original selector. This does not transfer DS-32000's 20-sheet Delicate-Mode load to Normal Mode. 20-sheet same-condition finder · 30-sheet same-condition finder.
The DS-70 and DS-80W remain out of the same earlier=yes combination at 30 sheets: their one-sheet input is below the minimum, and neither provides automatic duplex or a separate manual-feed route.
The P-215II uses its separate card slot for supported cards, not to enlarge the paper load. The P-208II can feed a card singly through the ordinary inlet but has no separate slot. Both are earlier USB scanners; a wireless/mobile plan adds the separate WU10 hardware and is a different setup.
The earlier ADS-1700W also matches earlier USB/duplex/manual-feed at 20 sheets through its USB-to-computer plan and separate one-card plastic-card slot. It leaves at 30 sheets because its ordinary ADF holds up to 20 per loading; the card slot is not a larger batch feeder. Use the same 20-sheet finder conditions · Change only the minimum to 30.
The earlier Canon DR-G2090 also clears both 20- and 30-sheet versions of this earlier USB, duplex and manual-feed interaction: its production ADF is rated for 300 sheets and Canon documents manual-feed modes. It is a 55.1 lb USB-only machine with no LAN or Wi-Fi, however, so that capacity does not make it portable or networked; check the 118.1-inch long-document limit, legacy host support, and the exact used package.
The four separate DR-G2110/DR-G2140 review profiles—the DR-G2110, DR-G2110USB, DR-G2140 and DR-G2140USB—also meet the 20- and 30-sheet earlier USB, duplex and manual-feed minima: the G-series manual documents their separate manual mode and their 500-sheet A4-or-smaller ADFs clear both thresholds, while above-A4 loading is capped at 200 sheets.
Open the finder with earlier models, USB, duplex, manual feed, and a 20-sheet minimum required.
Compare those same requirements at a 30-sheet minimum.
The Epson DS-1760WN (B11B274201) does not qualify for this required manual-feed condition. Its glass is an alternative platen, not a separately selected ADF manual-feed mode; depending on the selected minimum it may also fall short of 60 sheets. 20-sheet earlier-inclusive manual-feed finder.
All three remain excluded by the required separate manual-feed route even when the ADF capacity and other selected USB/duplex conditions fit. Exact-model reviews: DS-51000WN B11B277201 · DS-61000WN B11B283201 · DS-71000WN B11B284201. Open the same-answer finder.
On the earlier USB/duplex/manual-feed 20-sheet combination, the ADS-1500W qualifies on its USB-to-computer plan and separate one-card Card Slot; its card route does not increase the 20-sheet ADF load. The exact model guide limits the slot to one supported card at a time. Read the ADS-1500W card and feeder limits · Open the exact 20-sheet finder.
With earlier=yes, USB, duplex, separate manual feed and a 20-sheet ADF minimum, the ADS-1200 also qualifies: its manual directs one supported plastic card at a time through the separate Card Slot while ordinary paper uses its 20-sheet ADF. The ADS-2500We is excluded here because its plastic-card mode uses the ADF rather than a separate feed. Open the exact 20-sheet USB/manual-feed finder.
Raising only that earlier USB/manual-feed minimum to 30 sheets removes the ADS-1200: its 20-sheet ADF ceiling does not grow because the separate card slot is a one-card path, not a paper batch feeder. The ADS-2500We still lacks a separate manual-feed path. Use the same conditions at 30 sheets.
At 30 sheets, fi-6140Z joins the earlier USB/duplex/manual-feed result on its qualified 50-sheet A4 load and one-sheet-at-a-time ADF mode; it drops out if the minimum rises to 60. Check the exact fi-6140Z limits · Keep the same USB, duplex, manual-feed and 30-sheet answers.
Interaction: USB duplex capture with a TWAIN application
The Perfection V19 II/V39 II meet USB alone but do not enter the current USB/duplex/TWAIN/100- or 110-sheet result: the exact product/manual set documents neither duplex nor an ADF, and does not establish an exact-model TWAIN driver. Use the same 100-sheet USB/duplex/TWAIN choices · Compare at 110.
The current-reference ES-580W B11B258201 also meets the current-reference USB/duplex/TWAIN combination at 100 sheets for Letter/80 g/m²; its 100-sheet maximum fails at 110 and lowers for heavier or Legal stock. Keep the same 100-sheet requirements · Change only the threshold to 110.
The FF-680W is outside this 100-sheet USB/duplex/TWAIN case on the conservative detailed loading-table basis: its Letter/21-lb value is 80 sheets, although the generic specification also says 100. It remains outside when that same requirement rises to 110. Keep the exact same 100-sheet USB/duplex/TWAIN finder answers · Change only the capacity to 110.
At 100 sheets, the current-reference SP-1130N PA03811-B025 and SP-1120N PA03811-B005 do not meet the USB/duplex/TWAIN combination: their ADFs are rated at 50 sheets, not 100. Check SP-1130N capacity · check SP-1120N capacity · Keep the same 100-sheet conditions.
At 110 sheets, both SP-1130N PA03811-B025 and SP-1120N PA03811-B005 remain below the current-reference USB/duplex/TWAIN minimum; each published ADF limit is 50 sheets. Review the SP-1130N's feeder limit · review the SP-1120N's feeder limit · Change only the minimum to 110.
With earlier=no, USB, duplex and TWAIN required at a 100-sheet minimum, the DS-785W B11B288201 also matches on its Letter/80 g/m² feeder basis; check the current host driver and named application. Read the exact model assessment · Keep all five conditions together.
Changing only that minimum to 110 excludes the DS-785W: its documented Letter/80 g/m² maximum is 100 sheets per load. Check the capacity boundary · Use the same conditions at 110.
With earlier=no, USB, duplex and TWAIN required and a 100-sheet minimum, the DS-530X B11B286201 is an evidence-backed match on its Letter/80 g/m² ADF basis; verify the current host driver and named capture program. Read the exact-part assessment · Open the same 100-sheet finder.
Changing only that requirement to 110 sheets removes the DS-530X because its guide's Letter maximum is 100 at 80 g/m². The current-reference DS-30000 has a different, larger Normal-Mode feeder; compare its size and operating plan before choosing. Open the otherwise identical finder at 110.
The current-reference DS-61000WN B11B283201 and DS-71000WN B11B284201 also match this USB/duplex/TWAIN case at 100 sheets on their guide-rated 150-sheet ADF basis; check the current host and named application. Exact-model reviews: DS-61000WN B11B283201 · DS-71000WN B11B284201. Open the same-answer finder.
At 110 sheets, the DS-61000WN B11B283201 and DS-71000WN B11B284201 still meet this USB/duplex/TWAIN combination because their exact-guide ADF load is 150 sheets at 80 g/m²; 110 does not exceed their published limit. Exact-model reviews: DS-61000WN B11B283201 · DS-71000WN B11B284201. Open the same-answer finder.
Answer: minimum ADF capacity of 150 sheets
At the 150-sheet minimum, the DS-61000WN B11B283201 and DS-71000WN B11B284201 both match on their exact-guide basis of 150 sheets at 80 g/m²; the DS-51000WN B11B277201 has no documented ADF. This is a per-loading figure, not daily output. Exact-model reviews: DS-61000WN B11B283201 · DS-71000WN B11B284201. Open the same-answer finder.
Answer: minimum ADF capacity of 160 sheets
At the next valid 160-sheet minimum, the DS-61000WN B11B283201 and DS-71000WN B11B284201 both fall out: each guide gives a 150-sheet load at 80 g/m². The DS-51000WN B11B277201 has no documented ADF. Exact-model reviews: Ricoh fi-7600 review · DS-61000WN B11B283201 · DS-71000WN B11B284201. Open the same-answer finder.
Answer: include earlier models with a 50-sheet minimum
With earlier=yes, the SP-1130N PA03811-B025 and SP-1120N PA03811-B005 also qualify at the 50-sheet threshold on their shared guide basis of 80 g/m² paper and a stack no thicker than 5 mm; they are current-reference models, retained when earlier models are included. Compare the faster SP-1130N · and SP-1120N · Open the same earlier-inclusive 50-sheet finder.
When earlier=yes and the minimum is 50 sheets, the discontinued Brother ADS-2500W, ADS-2700W, ADS-2000e, ADS-3000N and the distinct ADS-2000 meet their documented one-load ADF limit. The ADS-2000 support specification says 20 lb Legal, while its version-0 guide says 20 lb Letter or A4; the other exact guides also add paper-size, stack-thickness and media limits. This is not a mixed-stock guarantee or a daily volume promise. Review the individual ADS-2500W, ADS-2700W, ADS-2000e, ADS-3000N and ADS-2000 sources before using this tier to compare older machines.
Answer: raise the earlier-inclusive minimum to 60 sheets
Changing only the earlier-inclusive ADF minimum to 60 also removes both the SP-1130N PA03811-B025 and SP-1120N PA03811-B005: their 50-sheet capacity is not a 60-sheet load. Check the SP-1130N limit · check the SP-1120N limit · Keep earlier=yes and 60 sheets.
Changing only the minimum from 50 to 60 sheets removes all five discontinued Brother desktop profiles discussed here: the ADS-2500W, ADS-2700W, ADS-2000e, ADS-3000N and distinct ADS-2000 each have a documented 50-sheet maximum, not 60. Other eligible scanners with larger documented feeders remain; do not confuse a per-load value with daily duty-cycle output.
Exact-model references: ADS-2500W · ADS-2700W · ADS-2000e · ADS-3000N · ADS-2000. Open the same earlier-inclusive finder at 60 sheets.
Answer: earlier, configured SharePoint, duplex and a 50-sheet minimum
At the exact earlier=yes, computer-free-cloud, duplex and 50-sheet conditions, the Brother ADS-2400N joins the documented result through an Ethernet-connected, preconfigured SharePoint profile; its user guide describes direct server transfer after setup. This is a specific legacy destination, not a guarantee for every cloud tenant or current authentication flow. Read the network/setup evidence · Open the same-condition 50-sheet finder.
Answer: raise that earlier network-and-duplex minimum to 60 sheets
At the exact earlier=yes, computer-free-cloud, duplex and 60-sheet conditions, the SP-1130N and SP-1120N remain excluded because neither has a documented scanner-side cloud plan; their 50-sheet feeder capacity alone does not establish the required route. Check the SP-1130N host workflow · check the SP-1120N host workflow · Keep these exact conditions.
Raising only the same earlier/cloud/duplex feeder minimum to 60 also removes the distinct N7100 PA03706-B205 and N7100E PA03706-B505: each is documented at 50 sheets on its stated stock basis, even though both can meet the corresponding PC-free network/duplex condition at 50. Check the N7100's ADF limit · compare the separate N7100E assessment · Keep the same earlier/cloud/duplex answers at 60 sheets.
Raising the feeder minimum to 60 does not cure the FF-680W's missing verified computer-free cloud route: its conservative ADF tag clears 60, but the direct-Wi-Fi phone document app is not established as a cloud destination. Keep the same earlier/cloud/duplex/60-sheet finder answers.
Changing only that numeric requirement to 60 removes the ADS-2400N: Brother documents a 50-page ADF maximum on its stated 20 lb (80 g/m²) Legal-paper or under-5-mm stack basis. Current-reference ADS-4700W and ADS-4900W retain a 60-sheet-or-higher ADF in this same cloud/duplex result, but their service and setup evidence is model-specific. Check the ADS-2400N boundary · ADS-4700W · ADS-4900W · Keep the same answers at 60 sheets.
Interaction: earlier models that meet the 50-sheet minimum and have a separate feed mode
With earlier=yes, manual feed and a 50-sheet minimum, the fi-6130Z, fi-6130, fi-6230Z, fi-6230 and fi-6240Z also remain eligible. Each family guide documents feeding one sheet at a time through the ADF and a 50-sheet qualified load; the fi-6230, fi-6230Z and fi-6240Z add glass platens for page-by-page work, not additional ADF capacity. fi-6240Z's Manual Feeding mode disables paper protection, so it is not a substitute for an ordinary protected batch feed. Historical software and seller package remain separate checks. fi-6130Z · fi-6130 · fi-6230Z · fi-6230 · fi-6240Z · Keep earlier, manual feed and 50 sheets in the finder.
At the same earlier=yes / separate-manual-feed / 50-sheet combination, the fi-6400 and fi-6800 remain additional options: each is a duplex ADF model with one-sheet manual mode and a qualified 500-sheet A4/Letter paper load. The published load is stock-qualified, not daily output. fi-6400 review · fi-6800 review.
With earlier=yes, manual feed required and a 50-sheet ADF minimum, the ADS-2500W, ADS-2700W, ADS-2000e and ADS-3000N fail the separate-feed condition even though each has a 50-sheet automatic feeder. Their supported media lists or carrier sheets do not establish a second inlet. This distinction matters when an occasional envelope or fragile original must follow a distinct path rather than the ordinary ADF. The current-reference ADS-4300N is one documented comparison with Manual Single Mode for supported originals, but it is one-at-a-time through the ADF and disables multifeed detection; check the exact media rules.
Keep earlier models, manual feed and the 50-sheet minimum together in the finder.
At earlier=yes, a 50-sheet minimum plus a separate manual-feed requirement excludes both ADS-1200 and ADS-2500We: the former has only a 20-sheet ordinary ADF despite its one-card slot, and the latter handles plastic cards through its 50-sheet ADF rather than a distinct inlet. Open the exact 50-sheet manual-feed finder.
With earlier=yes, a 50-sheet minimum and separate manual feed required, the fi-6140Z has a documented one-sheet mode through its ADF; the same unit also supports USB duplex and historical TWAIN, but those are not extra constraints in this answer. Read the fi-6140Z review · Keep earlier, manual feed and 50 sheets.
Answer: earlier-inclusive ADF boundary at 50 versus 60 sheets
With earlier=yes and a 50-sheet minimum, the ADS-2800W meets the selected feeder threshold: Brother's exact U.S. specification lists a 50-sheet ADF on its stated paper basis. The ADS-2800W is a discontinued scanner, not a promise of a current seller offer; capacity is per loading and paper size, weight and loading directions still matter. Read the ADS-2800W review and open the same earlier-inclusive finder at 50 sheets.
Changing only that same earlier-inclusive minimum from 50 to 60 removes the ADS-2800W because its documented ADF capacity is 50 sheets; the ADS-4300N remains eligible on its separate 80-sheet manufacturer rating. The two capacity figures are per-load values, not daily output or mixed-stock guarantees. Compare the ADS-2800W and ADS-4300N evidence, then use the same-condition finder at 60 sheets.
Answer: an earlier 100-sheet ADF versus a 110-sheet minimum
With earlier=yes and a 100-sheet minimum, the Brother PDS-5000 qualifies for supported paper weights only; its guide states 100 sheets at 28–80 g/m² and 90 at 105 g/m². Read the PDS-5000 feeder limits · Open the finder with earlier models and a 100-sheet minimum.
At a 110-sheet minimum with earlier models included, the PDS-5000 is out because its ADF capacity tops at 100; the earlier Canon DR-G2090 is a documented higher-capacity alternative. Its 300-sheet figure has a separate source-specific stock basis, so check that model's guide as well. Read the DR-G2090 assessment · Open the finder with earlier models and a 110-sheet minimum.
Earlier USB/TWAIN models: what duplex and feeder capacity change
With earlier models included, USB-to-computer and a documented TWAIN driver return 186 profiles; adding automatic duplex returns 161, a 20-sheet minimum returns 154, and a 200-sheet minimum returns 29. The Brother DS-635 illustrates the one-sheet simplex end; the distinct DS-740D is duplex but still loads one sheet at a time. For stack feeding, the fi-6140 is rated for 50 sheets on its specified A4 basis, while the fi-5650C reaches 200 on its own A4-qualified basis. Check the cited paper conditions and confirm that a used scanner's exact driver and software work with your host and capture app. See every model matching these same three choices.
At the selectable 200-sheet minimum, both fi-6400 and fi-6800 meet earlier=yes, USB and TWAIN: their qualified 500-sheet A4/Letter ADF load exceeds this minimum. The earlier fi-5650C also qualifies here on its 200-sheet A4-rated maximum, without a claim about A3 loading or current host compatibility. The fi-5750C matches this same USB/TWAIN/200-sheet answer on its exact A4-or-smaller load basis; at original sizes over A4 its guide specifies 100 sheets, and neither its archived USB nor TWAIN listing establishes a current computer route. fi-6400 review · fi-6800 review · fi-5650C review · fi-5750C review · Keep the same answers at 200 sheets.
The discontinued Brother DS-635 matches earlier=yes, USB-to-computer and TWAIN when duplex is not required; it is a one-sheet simplex scanner, so check the named host and capture application. The exact Brother page labels the base DS635 discontinued; its OS matrix warns that feature availability varies by operating system. Read the DS-635 review · Open the same-condition USB/TWAIN finder.
Adding automatic duplex removes the DS-635 because its exact brochure describes single-sided capture; the distinct DS-740D keeps this earlier USB/TWAIN one-sheet workflow but is not an ADF. The DS-740D is a different model and is still one-page-at-a-time. DS-635 simplex evidence · DS-740D duplex and feed limits · Keep the same answers and require duplex.
At the questionnaire's 20-sheet minimum, DS-635 is excluded: Brother's guide requires one original at a time, and its one-sheet input is not a multi-sheet ADF; the optional carrier sheet does not enlarge a batch load. The Ricoh SP-2240 PA03880-B405 also meets earlier=yes, USB, TWAIN and a 20-sheet minimum; its duplex ADF is rated up to 80 sheets only under the guide's stated paper-weight and stack-height conditions. Review the operating limits. The SP-1130N PA03811-B025 and SP-1120N PA03811-B005 also meet the earlier USB/TWAIN/20-sheet query; both document 50-sheet duplex feeders on the guide's 80 g/m² / 5 mm basis. Read the SP-1130N review · read the SP-1120N review. The current-reference ADS-1300 is one distinct example with a documented 20-sheet ADF; check its separate USB-C desktop setup and stock basis. The photo/document FF-680W also matches earlier=yes, USB/TWAIN and 20 sheets without a duplex requirement, using the conservative detailed-table capacity. The discontinued Epson DS-320 also qualifies when earlier models are included; its 20-sheet count is specifically at 80 g/m² and its card path stays separate from the paper ADF. Read the DS-635 input limit · Open the same-condition finder at 20 sheets.
The SP-1425 PA03753-B005 also fits the earlier=yes, USB, TWAIN and 20-sheet minimum without requiring duplex; PFU limits its 50-sheet ADF rating to 80 g/m² with a stack under 5 mm. Its separate flatbed is not a manual-feed mode. Review its exact paper routes · Keep the same four conditions.
At a 200-sheet minimum, DS-635 remains excluded: it has no documented ADF capacity and scans one original at a time; this requested number is one feeder loading, not daily output. For a high-capacity comparison, the fi-7600 FADGI bundle is built around a documented 300-sheet ADF, though package, stock and current workload/service fit should be checked separately. The photo/document FF-680W is also below this earlier USB/TWAIN/200-sheet minimum: its conservative Letter/21-lb basis is 80 sheets. The earlier-inclusive SP-1130N PA03811-B025 and SP-1120N PA03811-B005 are also below 200 sheets; each ADF holds 50 sheets on its guide's stated paper basis. Read the SP-1130N capacity assessment · read the SP-1120N capacity assessment. Check DS-635's one-sheet limit · Keep the same conditions at 200 sheets.
Specific answer: large-sheet duplex feeding on the fi-7460 and fi-7480
Both U.S. base configurations—the fi-7460 PA03710-B055 and fi-7480 PA03710-B005—have duplex capture and a separate Manual Feed Mode. PFU rates each ADF for 100 Letter sheets at 20 lb or A4 sheets at 80 g/m², but the listed loading capacity is 50 sheets for double-letter/A3 at 20 lb. So a 100-sheet requirement passes only when the media basis fits; do not carry the Letter/A4 number over to a large-paper stack. The manual mode presents one special original at a time and waits for the next, rather than adding a second bulk tray. fi-7460 review · fi-7480 review · Keep USB, duplex, manual feed, TWAIN and 100 sheets together in the finder.
Numeric boundary: 100 passes, 110 does not
At the valid 100-sheet minimum, the fi-7460 and fi-7480 match the questionnaire’s ADF requirement on PFU’s Letter/A4 basis. Raising only that number to 110 removes both: neither has a documented 110-sheet load, and 50 sheets is the specified A3/double-letter value. These are per-loading figures, not daily capacity or a mixed-stock promise. Compare the same USB/duplex/TWAIN conditions at 100 sheets · Change only the same-condition minimum to 110.
Interaction: current-reference USB, duplex, TWAIN and a 100-sheet ADF
With earlier=no, USB, duplex and TWAIN required together, both models remain at the 100-sheet edge for Letter/A4 loading and both leave at 110. A higher stated speed does not change that feeder boundary: the fi-7480 is 80/160 ppm/ipm and fi-7460 is 60/120, but each has the same sheet-capacity limits. Open the exact combined 100-sheet assessment · Keep all other answers and raise only the capacity to 110.
Both the fi-7460 PA03710-B055 and fi-7480 PA03710-B005 document automatic duplex capture. Their per-loading ADF is 100 Letter/A4 sheets on the specified stock basis but 50 sheets for A3/double-letter. The standalone base fi-7700 also provides duplex ADF capture with an integrated flatbed; its 300-sheet capacity applies to A4/Letter-or-smaller stock, not larger originals. fi-7460 review · fi-7480 review · Open the finder with the same duplex answer.
Both exact fi-7460/fi-7480 models and the standalone base fi-7700 have a separate Manual Feed Mode. The shared guide describes presenting one original and waiting for the next; it is not a second bulk tray. For fi-7700, Manual/Single also disables ultrasonic overlap checking and thick folds can skew. fi-7460 review · fi-7480 review · Open the finder with the same manual-feed answer.
At the 100-sheet minimum, both fi models qualify for the specified Letter/A4 load. This is per loading; their A3/double-letter figure is 50 sheets. fi-7460 review · fi-7480 review · Keep the same 100-sheet minimum in the finder.
At a 110-sheet minimum, neither fi model qualifies: their ADF is 100 sheets for the specified Letter/A4 stock and 50 for A3/double-letter. Do not interpret this as daily output. fi-7460 review · fi-7480 review · Keep the same 110-sheet minimum in the finder.
With earlier=no, USB, duplex, TWAIN and a 100-sheet minimum held together, both fi-7460 and fi-7480 qualify on the Letter/A4 feeder basis. fi-7460 review · fi-7480 review · Open the same-condition 100-sheet finder.
Changing only that combined minimum to 110 removes both models; they remain 100-sheet Letter/A4 feeders, not 110-sheet ADFs. fi-7460 review · fi-7480 review · Change only the minimum in the same-condition finder.
With duplex, manual feed and a 100-sheet minimum required together, the fi-7460 and fi-7480 match on their Letter/A4 load basis; use the one-at-a-time Manual Feed Mode for special originals, not a second batch tray. fi-7460 review · fi-7480 review · Open the same-condition finder.
At a 100-sheet minimum, the fi-7460 and fi-7480 qualify at 100 Letter/A4 sheets and 50 A3/double-letter sheets; the standalone base fi-7700 also qualifies, with a separate 300-sheet Letter/A4-or-smaller basis and a 100-sheet larger-original limit. These are per-load manufacturer figures, not daily volume. The standalone fi-8290 meets a 100-sheet ADF minimum at the documented 80 g/m² (20 lb) paper and 10-mm stack limit; a 110-sheet minimum excludes it. Review the fi-8290's 100-sheet load qualification · fi-7460 review · fi-7480 review · Keep the same 100-sheet minimum in the finder.
At a 110-sheet minimum, the fi-7460 and fi-7480 no longer qualify: their ADF is 100 Letter/A4 sheets and 50 A3/double-letter. The standalone base fi-7700 still clears 110 for A4/Letter-or-smaller pages, but its shared guide limits larger originals to 100 sheets at the specified paper weight. The fi-8820 remains a separate 500-sheet option if that larger production class suits the job. Do not interpret ADF capacity as daily output. fi-7460 review · fi-7480 review · fi-8820 review · Keep the same 110-sheet minimum in the finder.
With earlier models excluded, USB-to-computer, automatic duplex, a separate manual-feed mode and TWAIN together match 35 reviewed configurations before an ADF minimum is set. Setting the smallest 20-sheet minimum leaves all 35; raising it to 30 removes eight 20-sheet feeder profiles, leaving 27. A 50-sheet minimum still returns 27, 100 returns 23, 110 returns 13 and 200 returns 11. These are one-load floors, not daily throughput. The fi-7460 and fi-7480 are each rated for 100 Letter sheets at 20 lb (A4 at 80 g/m²), but 50 A3/double-letter sheets, so they leave at 110; the base fi-8290 is another 100-sheet model and leaves at that threshold too. For larger loads, the base fi-7600 and fi-7700 are rated for 300 A4/Letter-or-smaller sheets, but 100 sheets for larger originals at the documented 80 g/m² basis. The current U.S. fi-8700 also clears these numeric thresholds on its 300-sheet A4/Letter basis; PFU Japan's exact-model table lists Manual Feed/Single, but the U.S. sources do not explain its procedure or media limits, so check the local guide before relying on special-original handling. The fi-7700's flatbed is a different capture surface. Confirm paper weight, stack limits, host compatibility and a TWAIN driver that works with the intended capture software and offered unit. fi-7460 assessment · fi-7480 assessment · base fi-7600 assessment · base fi-7700 assessment · base fi-8290 assessment · Review the fi-8700's U.S. capacity and regional manual-feed notes · Open all 35 matches with the same requirements · Keep the 20-sheet minimum · Change only the minimum to 30 sheets · Apply a 50-sheet minimum · Apply a 100-sheet minimum · Apply a 110-sheet minimum · Apply a 200-sheet minimum.
With earlier=no, USB, duplex, manual feed, TWAIN and a 100-sheet minimum together, the standalone base fi-8290 also matches; its ADF limit is 100 sheets on the qualified paper/stack basis. The fi-7460, fi-7480, base fi-7600 and standalone base fi-7700 also fit for their documented Letter/A4 stock conditions. The fi-7700's shared guide limits larger originals to 100 sheets at 80 g/m². The special feed is separate from the ADF stack. fi-7460 review · fi-7480 review · fi-7600 base assessment · fi-7700 base assessment · fi-8290 base assessment · Open the same-condition finder.
At a 50-sheet minimum, the SP-1425's flatbed is not a dedicated manual-feed mode. The fi-7460, fi-7480 and standalone base fi-7600/fi-7700 do document distinct special-feed modes; the fi-7700's separate 300-sheet A4/Letter ADF basis drops to 100 sheets for larger originals. At a 50-sheet minimum, the base fi-8290 also fits this USB/duplex/manual-feed/TWAIN combination, but its 100-sheet ceiling is below the higher-volume fi-7600/fi-7700 loading basis. Check the SP-1425 route distinction · fi-7460 · fi-7480 · fi-7600 · fi-7700 base assessment · fi-8290 base assessment · Keep the same 50-sheet combination.
Changing only the minimum to 110 removes the fi-7460 and fi-7480, and the base fi-8290 also drops out because PFU documents a 100-sheet ADF ceiling; the base fi-7600 and fi-7700 still match for Letter/A4-or-smaller loads. Larger-than-Letter/A4 originals are limited to 100 sheets on the documented fi-7600/fi-7700 basis; the fi-8820 is another 500-sheet match. See why the fi-8290 leaves above 100 sheets · Check the fi-7600 size-specific load · Check the fi-7700 base assessment · fi-8820 assessment · Change only the minimum in the same-condition finder.
With a 200-sheet minimum, the base fi-8290 does not match: its documented ADF capacity is 100 sheets. The standalone base fi-7600 and fi-7700, plus fi-8820, match on their documented Letter/A4-or-smaller feeder bases. Both fi models are rated at 300 sheets for that stock basis, and the shared guide limits larger originals to 100 sheets at 80 g/m². Review the fi-8290's capacity limit · Read the fi-7600 base assessment · Read the fi-7700 base assessment · Compare the fi-8820 · Keep the exact conditions in the finder.
Answer: the ADS-1250W's 20-sheet feeder boundary
At a 20-sheet minimum, the fi-6130Z, fi-6130, fi-6230Z, fi-6230 and fi-6240Z meet earlier=yes, USB, duplex and manual-feed requirements alongside larger-capacity matches. Their manuals describe adding originals one at a time through the same ADF during a configured interval; the qualified 50-sheet load still governs ordinary batches. The fi-6230, fi-6230Z and fi-6240Z have flatbeds for separate one-at-a-time glass scanning, but those platens do not create a second feeder. For fi-6240Z, the manual-feeding mode is a same-ADF procedure with paper protection disabled, not a separate bypass. fi-6130Z · fi-6130 · fi-6230Z · fi-6230 · fi-6240Z · Keep all five answers in the same finder.
The fi-6400 and fi-6800 are additional earlier USB/duplex/manual-feed choices at the 20-sheet minimum: each has a qualified 500-sheet A4/Letter load and a one-original-at-a-time Manual Feed Mode. This is not a daily throughput or every-stock guarantee. fi-6400 review · fi-6800 review.
Brother's exact-model specification rates the ADF for 20 sheets on 20 lb (80 g/m²) Legal paper or a stack under 5 mm. This is a per-load maximum, not daily output; mixed, long or thick originals have separate handling limits. A plastic Card Slot is a different path and does not increase the ADF load.
At 20 sheets, the ADS-1250W meets earlier=yes, Wi-Fi, duplex and separate manual-feed choices; its 20-sheet ADF limit is for 20 lb Legal or a stack under 5 mm, while the Card Slot accepts only one supported plastic card at a time.
Plastic cards do not go in the ADF, and Brother warns that some cards can scratch or embossed cards may fail. Long originals are simplex-only under a separate resolution limit. Read the ADS-1250W card and paper limits · Keep the same earlier/Wi-Fi/duplex/manual-feed/20-sheet conditions.
At 30 sheets, raising only the earlier Wi-Fi/duplex/manual-feed minimum removes the ADS-1250W: its documented ADF ceiling is 20 sheets, and its separate Card Slot does not act as a batch tray.
The Canon DR-S350NW remains a distinct Wi-Fi special-original option in this 30-sheet combination; its mode and feed limits are not inherited by Brother. Check the ADS-1250W's exact 20-sheet basis · Open the same conditions with only the minimum raised to 30.
At an earlier USB/duplex/manual-feed combination with a 20-sheet minimum, the ADS-1250W qualifies through its USB-computer plan; the separate Card Slot is limited to one supported plastic card at a time.
Manual card use does not change its 20-sheet paper load, and the USB route is a computer workflow, not Wi-Fi. Review the model's USB and Card Slot details · Keep those exact earlier/USB/duplex/manual/20-sheet answers.
The fi-6140Z also fits these 20- and 30-sheet earlier/USB/duplex/manual-feed conditions: its guide describes adding one original at a time through the same ADF, while ordinary A4 stacks remain limited to 50 sheets at 80 g/m². Manual Feeding disables paper protection, so it is not a separate tray or a handling guarantee. Read the fi-6140Z manual-feed assessment · Same answers at 20 sheets · Same answers at 30 sheets.
Interaction: earlier USB-and-Wi-Fi duplex models at a 50-sheet minimum
With earlier=yes, both USB and Wi-Fi, duplex and a 50-sheet minimum, the ScanSnap iX500 matches on PFU's 50-sheet A4 80 g/m² (20 lb) feeder specification; capacity varies with paper. Read the exact-model iX500 assessment · The Epson ES-590W is another matching larger-feeder comparison. Open the same earlier/both/duplex/50-sheet finder.
The iX500's USB and Wi-Fi are different operating choices, and its old phone/cloud page is not current compatibility proof. The USB-plus-Ethernet SP-1130N does not satisfy a Wi-Fi must-have. The ES-590W is another exact-result comparison with a 100-sheet duplex ADF and both host connections, but its own setup details still matter. Keep every condition unchanged in the finder.
Raise only the earlier duplex feeder minimum to 60 sheets
Raising only that minimum to 60 excludes the ScanSnap iX500: PFU lists 50 A4 80 g/m² (20 lb) sheets and says capacity varies with paper weight. Check the exact iX500 feeder limit · The Epson ES-590W and ScanSnap iX2500 are distinct higher-capacity comparisons. Keep earlier=yes, both connections and duplex at 60 sheets.
At this 60-sheet threshold, the Epson ES-590W remains a documented USB/Wi-Fi duplex alternative with a larger ADF; the newer ScanSnap iX2500 is another separate reference model. Compare their own current compatibility and paper limits rather than transferring iX500's legacy software or package claims. Open the exact same-condition finder.
Combining earlier-model inclusion, both connections, duplex and feeder capacity
With earlier models included, USB and Wi-Fi for separate setups, automatic duplex, and a 50-sheet ADF minimum return 32 matching configurations; raising only that minimum to 60 returns 22 and removes the iX500, whose feeder rating is 50 A4 sheets at 80 g/m² (20 lb) and varies with paper.
“Both” means the scanner offers USB and Wi-Fi as choices for different setups, not that one job uses both links simultaneously. The discontinued iX500 meets this documented hardware-and-paper combination only through its stated 50-sheet A4/80 g/m² basis; its current software and host fit are not guaranteed, and the exact condition and package of any used unit still need checking. The exact U.S. Epson ES-590W B11B288202 is a distinct result with a 100-sheet duplex ADF and USB/Wi-Fi, though Epson's 100-sheet rating is qualified for Letter paper at 80 g/m² and a stack under 12 mm. At 60 sheets, compare its own current software and paper limits with the separate ScanSnap iX2500 rather than transferring iX500's legacy capabilities. The SP-1130N has USB and wired Ethernet, not Wi-Fi, so it fails this “both” requirement.
Read the iX500 assessment and its software limitations · Compare the exact U.S. ES-590W · Review the separate iX2500 · Check why USB plus Ethernet is not Wi-Fi. See all 32 matches at the same earlier/both/duplex/50-sheet settings, or keep those answers and raise only the minimum to 60 sheets.
Answer: two earlier 80-sheet Departmental feeders, with and without glass
At an 80-sheet minimum, both fi-6400 and fi-6800 meet earlier=yes, USB, duplex, manual feed and TWAIN; each is rated for up to 500 A4/Letter sheets at 80 g/m² (20 lb). The feeder rating is stock-qualified, and TWAIN/host compatibility needs an exact-system check. fi-6400 review · fi-6800 review · Keep all six answers at 80 sheets.
At a 90-sheet minimum, both fi-6400 and fi-6800 meet earlier=yes, USB, duplex, manual feed and TWAIN; each is rated for up to 500 A4/Letter sheets at 80 g/m² (20 lb). The feeder rating is stock-qualified, and TWAIN/host compatibility needs an exact-system check. fi-6400 review · fi-6800 review · Keep all six answers at 90 sheets.
With earlier=yes, USB, duplex, manual feed, TWAIN and an 80-sheet minimum together, both fi-7180 and fi-7280 match; their 80-sheet ADF limit is on PFU's 20 lb/80 g/m² basis and under-8-mm stack ceiling. The fi-7180 is ADF-only, while the fi-7280 adds a separate 8.5 × 11.7-inch flatbed; its glass does not increase ADF capacity. PFU describes both as discontinued/no longer for sale, and legacy software availability is not assured. Open the same earlier/USB/duplex/manual-feed/TWAIN/80-sheet finder.
Raising only this same-condition minimum to 90 removes both fi-7180 and fi-7280; each is specified for 80 ADF sheets, so neither meets a 90-sheet per-load requirement. The fi-7180's ADF limit and the fi-7280's ADF limit are the same despite its glass platen; the standalone fi-7600 and fi-8290 are distinct higher-capacity comparisons with their own stock and host conditions. Keep every other answer and change only the minimum to 90 sheets.
Earlier ScanSnap feeders cross the 50-sheet threshold, not the 60-sheet threshold
With earlier=yes, USB and automatic duplex required, the fi-5110C PA03360-B055 and fi-5120C also meet a 50-sheet minimum on their specified 20 lb (80 g/m²) capacity basis; current legacy-host support remains an exact-system check. Fifty is a maximum per loading, not a daily throughput claim. The fi-5120C can use either USB or Ultra SCSI, not both simultaneously. Read the fi-5110C assessment · read the fi-5120C assessment · Open the same earlier/USB/duplex/50-sheet finder.
Raising only the same earlier/USB/duplex feeder minimum to 60 sheets removes the fi-5110C and fi-5120C: both are specified for a maximum 50-sheet loading on the cited stock basis, not 60. Confirm actual paper and the exact used unit before relying on its feeder limit. Check the fi-5110C's 50-sheet limit · check the fi-5120C's 50-sheet limit · Open the same earlier/USB/duplex/60-sheet finder · Compare the separate Canon R40 II.
With earlier=yes, USB and automatic duplex required, the S500, S500M, S510, S510M, S1500 and S1500M meet a 50-sheet minimum; these distinct historical ScanSnap models have model-specific software and paper/stack qualifications. The U.S. S500 sheet says 50 sheets at 20 lb while its English guide says A4-or-smaller at 64 g/m² / 17 lb and a 5 mm stack maximum; the S500M sheet says 20 lb and its exact English guide specifies 20 lb / 80 g/m² with the same 5 mm maximum. The S510 and S510M have separate source/region discrepancies; follow the correct exact-unit manual for each. The U.S. S1500 PA03586-B005 and S1500M PA03586-B105 sheets each specify 50 Letter sheets at 20 lb (80 g/m²); this is a maximum per loading, and feeder capacity varies with stock. The shared manual identifies distinct S1500/S1500M software packages, and current host compatibility must be verified. Read S500's Windows/feeder assessment · Read S500M's Mac/feeder assessment · Read S510's Windows/feeder assessment · Read S510M's Mac/feeder assessment · Read S1500's assessment · Read S1500M's assessment · Open the same earlier/USB/duplex/50-sheet finder.
Raising only the same earlier/USB/duplex feeder minimum to 60 sheets excludes S500, S500M, S510, S510M, S1500 and S1500M, each with a stated 50-sheet maximum; the Canon R40 II is a separate duplex comparison with its own documented capacity and software requirements. The threshold is per loading, not daily throughput, and does not erase the paper basis on any ScanSnap. The S1500 U.S. sheets specify Letter stock at 20 lb (80 g/m²); check the exact stock and used unit. A 60-sheet candidate still needs a current host and package check. S500's paper-qualified 50-sheet ceiling · S500M's paper-qualified 50-sheet ceiling · S510's 50-sheet ceiling · S510M's paper-qualified 50-sheet ceiling · S1500's paper-qualified 50-sheet ceiling · S1500M's paper-qualified 50-sheet ceiling · Compare the Canon R40 II separately · Keep all other answers and change only the minimum to 60 sheets.
Earlier fi-series 50-sheet boundary
With earlier=yes, USB, duplex and a 50-sheet minimum, the fi-5220C and fi-4120C2 meet the feeder threshold on their manufacturer-stated paper basis. Both have a maximum 50-sheet load; the fi-5220C adds an A4/Letter flatbed, while fi-4120C2 PA03289-B315 is ADF-only. The limit is per loading, not daily throughput, and historical host compatibility still needs checking. Read the fi-5220C assessment · read the fi-4120C2 assessment · Keep the same earlier/USB/duplex/50-sheet answers.
Raising only that earlier/USB/duplex minimum from 50 to 60 sheets excludes fi-5220C and fi-4120C2: each is specified for up to 50 sheets per loading, not 60. The stated maximum remains paper-qualified; it is not a daily-duty rating. The separately assessed Canon R40 II is a different 60-sheet comparison. Check the fi-5220C feeder limit · check the fi-4120C2 feeder limit · Change only the minimum to 60 in the same finder.
Earlier fi-series feeder boundaries: compare exact models and host limits
For earlier=yes with USB and duplex required, the exact base fi-6140 has a paper-qualified 50-sheet A4/80 g/m² ADF: it meets 20- and 50-sheet minima but leaves at 60. This is per-loading capacity, not a daily-volume claim; the model is ADF-only and no current host or used-unit condition is established. The different fi-5650C remains through these 20- and 50-sheet minima on its 200-sheet A4-qualified maximum; the paper basis does not make that an A3 loading claim. Review the base fi-6140's feed and interface limits · Read the fi-5650C assessment · 20 sheets · 50 sheets · Raise the same minimum to 60.
The non-Z fi-6140 guide describes Manual Feeding as one sheet at a time through the same ADF, not a separate tray or another batch feeder. It remains a historical software path whose exact host fit and used-unit operation require checking. With earlier=yes, USB, duplex and manual feed selected, it meets 20- and 30-sheet minima on its 50-sheet ADF; with earlier=yes, manual feed and a 50-sheet minimum it also remains a candidate. The distinct fi-4750L also has a single-sheet ADF Manual Feed mode, but its 250-sheet maximum is stated at 64 g/m² and varies with paper size and weight; its guide routes difficult originals such as envelopes to the flatbed. Neither mode is another tray or an exemption from the model's loading rules. The earlier M4097D also supports a one-sheet-at-a-time ADF Manual Feed mode; its 100-sheet A4/Letter capacity at 64 g/m² remains a separate load limit, and it uses SCSI-2 rather than USB. Read the fi-6140's documented feed-mode limits · Keep USB/duplex/manual feed at 20 · Raise only that minimum to 30 · Check earlier/manual feed at 50.
With earlier=yes, USB, duplex and TWAIN required, the base fi-6140 meets a 50-sheet minimum on its exact 50-sheet A4/80 g/m² ADF; at 60 sheets it drops out because that load exceeds the documented maximum. With earlier models included, USB, automatic duplex and TWAIN required, the 50-sheet minimum yields 134 reviewed configurations; raising only that minimum to 60 yields 97, while the base fi-6140 leaves because its paper-qualified maximum is 50 A4 sheets at 80 g/m² (20 lb) with a 5 mm stack-height limit. The archived page lists USB and TWAIN/ISIS, but a dated driver route does not prove compatibility with a current computer or capture application. In this same earlier/USB/duplex/TWAIN setup, the fi-5650C also qualifies at 20, 40, 50 and 60 sheets, and remains at the questionnaire's maximum 200-sheet minimum on its published A4-qualified capacity; no A3 stack or modern host fit follows. The fi-5750C also passes these 20–60-sheet minima and the 200-sheet maximum on an A4-or-smaller 80 g/m² basis; at sizes over A4, the exact guide rates 100 sheets, not 200. The sources name historical USB/TWAIN, not a current host guarantee. TWAIN is a separate hard filter: the ScanSnap S1500 and S1500M have USB, duplex and 50-sheet profiles, but their own documentation says they do not conform to TWAIN, so neither enters when that driver is essential. See their distinct S1500 and S1500M assessments rather than assuming a PDF workflow is a TWAIN source. Check the fi-6140 interface and capacity · Read the fi-5650C review · Read the fi-5750C ADF and host assessment · Compare the fi-6400's larger ADF at 60 sheets · Keep the same earlier/USB/duplex/TWAIN setup · 20 sheets · 40 sheets · 50 sheets · 60 sheets · 200 sheets.
With earlier=yes, USB, duplex and TWAIN required, the base fi-6240 meets a 50-sheet minimum on its exact 50-sheet A4/80 g/m² ADF; at 60 sheets it drops out. This is the rated one-load ceiling, not daily volume: the non-Z guide adds a 5 mm stack-height limit, and the separate flatbed does not enlarge the ADF. Raising only the same minimum to 60 sheets removes base fi-6240; the fi-6400 remains a larger-feeder comparison in this USB/duplex/TWAIN set. Historical driver documentation does not confirm a current host or the condition of an individual old unit. Read the exact base fi-6240 capacity and flatbed assessment · Compare the fi-6400 at 60 sheets · Keep the same earlier/USB/duplex/TWAIN task at 50 sheets · Raise only that minimum to 60 sheets.
With earlier=yes, USB and TWAIN required, the base fi-6140's archived profile lists USB and TWAIN/ISIS; adding a duplex requirement does not change its duplex hardware, and its guide still limits a loading to 50 specified A4 sheets. Historical driver documentation is not a current host guarantee. The fi-5650C is a second USB/TWAIN/duplex option in these earlier-inclusive answers, with a published 200-sheet A4-qualified maximum; its old driver support does not certify a current host. The fi-5750C also has documented USB and historical TWAIN/ISIS plus automatic duplex; its model-specific guide supports 200 A4-or-smaller sheets but only 100 above A4, and the archival driver page does not show a current host route. Review the exact fi-6140 computer-side limits · Read the separate fi-5650C assessment · Read the fi-5750C interface assessment · Keep earlier/USB/TWAIN · Add duplex to the same setup · Set a 20-sheet minimum.
At a 20-sheet ADF minimum, the earlier fi-4340C meets the requirement on its 100-sheet A4 rating in a USB/TWAIN host plan; current driver and computer fit still need independent verification. Compare the earlier Workgroup reviews: fi-6110 · fi-6130Z · fi-6130 · fi-6230 · fi-6230Z · fi-6400. Read the fi-4340C assessment · Keep the same earlier/USB/TWAIN/20-sheet answers. The fi-6140Z and fi-6240Z also meet this 20-sheet minimum on their 50-sheet A4/80 g/m² ADFs with USB and documented TWAIN; the fi-6240Z adds a separate flatbed that does not increase feeder capacity. Both old host/driver combinations still need checking. Read the fi-6140Z TWAIN and feed-mode assessment · Read the fi-6240Z TWAIN, flatbed and feed-mode assessment.
For earlier USB/duplex requirements, the fi-4340C’s own 100-sheet A4 limit meets 20-, 50- and 60-sheet minima; fi-6240Z is another exact duplex/USB candidate at 50, not 60, with a separate flatbed that does not raise the ADF limit. The fi-5650C also meets the 60-sheet ADF minimum on its distinct 200-sheet A4-rated maximum; no A3-specific capacity follows. Other named 50-sheet fi-series models likewise leave at 60. Compare earlier fi models: fi-6110 · fi-6130Z · fi-6130 · fi-6230 · fi-6230Z · fi-6140Z · fi-6240Z assessment. Read the fi-4340C feeder assessment · Read the fi-5650C capacity review · Compare the Canon R40 II at the 60-sheet step · Keep earlier USB and duplex · Keep the 20-sheet minimum · Keep the 50-sheet minimum · Raise the same minimum to 60 sheets.
On this earlier/USB/duplex/TWAIN task, the fi-4340C's maximum is 100 A4 sheets per load: it meets 20-, 40-, 50-, 60-, 70-, 80-, 90- and 100-sheet minimums, then leaves at 110; its exact-model sources conflict on the printed paper-weight basis. Read the fi-4340C review and source qualifications. Compare earlier fi models: fi-6110 · fi-6130Z · fi-6130 · fi-6230 · fi-6230Z · fi-6400. 20 sheets · 40 sheets · 50 sheets · 60 sheets · 70 sheets · 80 sheets · 90 sheets · 100 sheets · 110 sheets. The exact fi-6140Z and fi-6240Z are additional 50-sheet A4/80 g/m² USB/duplex/TWAIN candidates at 20, 40 and 50 sheets, then leave at 60; fi-6240Z adds a separate flatbed, not ADF capacity, and its Manual Feeding uses the same ADF with paper protection disabled. Confirm the historical host/driver fit. Review fi-6140Z capacity and interface limits · Review fi-6240Z capacity, flatbed and interface limits.
fi-4640S capacity is a qualified per-load figure
With earlier=yes and a 100-sheet minimum, the fi-4640S remains a possible match only on the specified Letter/A4 17-lb basis; its load can drop for larger or heavier stock. This is not an A3 capacity or a daily-volume result. The M4097D also meets the earlier 100-sheet threshold on its 64 g/m² chart basis for A4/Letter, but the same chart allows 67 sheets for A3/Double Letter. The fi-4750C also reaches a published 100-sheet maximum at 64 g/m² (17 lb), but the reviewed page does not establish that load for A3 or every stock. The separate monochrome fi-4750L has a 250-sheet maximum at 64 g/m²; its operator guide separately qualifies the load by paper size and weight, so do not convert it into 100 or 250 A3 sheets without checking that chart. Read the fi-4640S feeder limits · Compare the distinct fi-4750C basis and size caveat · Keep earlier=yes and the 100-sheet minimum together.
Raise only the same minimum to 110 sheets and the fi-4640S leaves this set; the separate fi-7700 is rated at 300 sheets. The earlier M4097D also leaves at 110: its guide gives 100 A4/Letter and 67 A3/Double Letter sheets at 64 g/m². The fi-4750C also leaves because its published maximum is 100 sheets, while the distinct fi-4750L remains above 110 on its own 250-sheet published maximum at the specified 64 g/m² basis; its exact guide still requires size/weight-specific loading checks. The larger fi-7700 feeder belongs to another model, not an assumed upgrade or seller-unit substitution. Read the separate fi-7700 assessment · Check the fi-4750C's published capacity limit · Keep earlier=yes and the 110-sheet minimum together.
fi-5530C2: 100 Letter/A4 sheets, 50 A3 sheets
With earlier=yes, USB, duplex and TWAIN required, the fi-5530C2 meets a 100-sheet minimum for Letter/A4 at 80 g/m²; its rated A3 load is 50 sheets. This is stock-qualified per loading, not 100 A3 pages or a daily-volume figure; a current host fit remains unverified. The distinct fi-5650C also passes the same 100-sheet minimum on its published 200-sheet A4 basis; its capacity source does not establish 200 sheets of A3. Read the exact fi-5530C2 capacity and host limits · Compare the fi-5650C assessment · Open the exact same earlier/USB/duplex/TWAIN setup at 100 sheets.
Raise only the same minimum to 110 sheets and the fi-5530C2 no longer qualifies: its U.S. datasheet gives a 100-sheet Letter/A4 load at 20 lb. Its A3 load is lower still at 50 sheets; check the source-specific stock guidance and actual workflow. The fi-6400 is a separate higher-capacity earlier USB/duplex/TWAIN alternative on its own documented A4/Letter basis. The fi-5650C remains for this 110-sheet earlier/USB/duplex/TWAIN threshold on its separately published maximum of 200 A4 sheets; neither figure establishes a 200-sheet A3 load. Check the fi-5530C2's 100-sheet ceiling · Compare the fi-6400 assessment · Read the fi-5650C review · Open the same finder with only the minimum raised to 110.
fi-4750L: reaching the 200-sheet minimum is not a universal load promise
At the finder's 200-sheet upper minimum, the earlier fi-4750L remains a match for the published 250-sheet maximum at 64 g/m², but the exact guide qualifies loading by paper size and weight; Manual Feed inserts one sheet at a time into the same ADF. Its 20 mm A4/Letter and 10 mm A3/11-by-17 stack-height limits matter, and difficult or fragile originals belong on the separate flatbed path rather than being treated as ADF exceptions. Read the exact fi-4750L paper-path and setup assessment · Keep earlier, manual feed and the 200-sheet minimum together.
Legacy fi-4860C2: SCSI identity, Manual Feed and the 200-sheet ceiling
At the finder's 200-sheet ceiling, the earlier fi-4860C2 still qualifies on its stated 500-sheet A4/Letter at 80 g/m² basis; the operator guide's chart varies by sheet size and paper weight, so that is not a 500-sheet A3 promise. This older A3 color duplex ADF has an operator-controlled Manual Feed mode, but no separate flatbed; its standard media range and exact restrictions still apply. Read the fi-4860C2's exact paper-path and host assessment · Keep the earlier-model setting and 200-sheet minimum together.
When duplex, Manual Feed and TWAIN are not enough
With earlier models included, duplex and Manual Feed required, TWAIN required, and a 200-sheet minimum, the fi-4860C2 passes on its documented A4/Letter 500-sheet basis; the exact manual varies capacity by paper size and weight, and its SCSI host still needs independent compatibility checks. Its archived page specifies Ultra Wide SCSI (SE) with a 68-pin connector, not a contemporary USB connection, and a legacy TWAIN label does not prove that a present computer, driver or capture application will work. Read the exact fi-4860C2 review · See the same earlier, duplex, Manual Feed, TWAIN and 200-sheet conditions.
Add a USB requirement to that earlier duplex/Manual Feed/TWAIN 200-sheet scenario and the fi-4860C2 drops out: its page specifies Ultra Wide SCSI (SE), not USB. A separate fi-6400 USB candidate may satisfy that finder combination, but it is a different model—not a substitute for the C2. Keep USB and all the other selected conditions together.
M4099D: a high-capacity legacy ADF, not a modern-host recommendation
With earlier=yes and a 20-sheet minimum, the M4099D clears the numeric threshold: PFU's archived model page gives a maximum 1,000-sheet ADF load at 64 g/m², not a size-independent promise. The exact fi-4990C also exceeds 20 on its qualified up-to-1,000-sheet rating; the guide's A4 hopper basis does not establish an A3 capacity. The fi-5650C also meets this earlier-inclusive 20-sheet threshold; its exact sources give a maximum of 200 on A4 stock, not a 200-sheet A3 loading. The distinct M4097D also passes 20 on its separately documented 100-sheet A4/Letter basis. For the M4099D, no size-specific 1,000-sheet A3 load or flatbed is established; see its model-specific review, the fi-4990C assessment, the fi-5650C assessment and open the finder with earlier=yes and the same 20-sheet minimum.
With earlier=yes and a 200-sheet minimum, the M4099D and fi-4990C clear the threshold on their own published 1,000-sheet maxima at stated paper bases, while the fi-5650C qualifies on its published 200-sheet maximum; none of these figures proves a 200- or 1,000-sheet A3 load or a universal stock limit. The fi-5750C also exactly reaches the selected 200-sheet minimum, but only on the model guide's A4-or-smaller, 80 g/m² loading basis; for originals over A4 it specifies 100 sheets. These separate maxima do not guarantee a used feeder or mixed-stock run. The M4099D profile specifies 64 g/m²; the fi-4990C driver guide further qualifies its hopper to A4 high-quality stock; the fi-5650C profile states A4 at 80 g/m² / 20 lb while its exact driver guide prints a different ream-weight phrase. Read the M4099D assessment, fi-4990C assessment, fi-5650C assessment and fi-5750C assessment separately, then keep earlier=yes and the 200-sheet minimum in the finder.
With earlier models included, duplex, Manual Feed, historical TWAIN and a 200-sheet minimum required, the fi-4990C matches its sourced profile only through Ultra Wide SCSI; its English manual-feed procedure and size-specific capacity remain unknown. Its distinct older M4099D sibling uses a separately documented SCSI-2 / RS-232C / video interface family. Neither historic TWAIN nor a manual-feed label establishes a current host or special-media permission. Read the fi-4990C assessment and M4099D review, then open the same earlier/duplex/Manual Feed/TWAIN/200-sheet scenario.
Add USB to the earlier/duplex/Manual Feed/TWAIN/200-sheet task and the fi-4990C is excluded: its exact model sources specify Ultra Wide SCSI, not USB. The separately documented M4099D is also excluded by its own legacy interfaces. A USB-capable fi-6400 is a different candidate, not a substitute for either model; verify the exact host. Review the fi-4990C interface evidence and M4099D assessment · keep USB and every other condition selected in the finder.
With earlier=yes, Manual Feed required and a 50-sheet minimum, the M4099D and fi-4990C both clear their published capacity thresholds, but their exact manual-feed instructions differ or remain unknown. M4099D's guide describes one sheet at a time on the same hopper; the English fi-4990C sources only label Manual Feed and do not establish the procedure or media limit. Neither 1,000-sheet maximum is an A3 or every-stock guarantee. Read the M4099D and fi-4990C reviews and keep earlier, Manual Feed and the 50-sheet minimum together.
At earlier=yes with Manual Feed and a 200-sheet minimum, both M4099D and fi-4990C clear the numeric threshold on their own qualified 1,000-sheet maximums; only the M4099D source describes its one-sheet same-hopper procedure. The fi-4990C English profile does not establish the exact feed path or an A3 load chart. Read the M4099D and fi-4990C assessments, check the actual paper rules, then open the same-condition finder.
With earlier=yes and a 100-sheet minimum, the M4099D clears the numeric threshold on PFU's 1,000-sheet maximum at 64 g/m². The fi-4990C also clears 100 on its qualified 1,000-sheet rating, but the English guide's A4 hopper basis does not prove 100 sheets of A3. The fi-5650C also meets 100 on its published 200-sheet A4 maximum; its source does not establish 100 sheets of A3 or every stock. These are paper-qualified capacities, not size-independent loading promises; seller condition and host compatibility still require exact checks. Read the exact M4099D review · read the fi-4990C assessment · read the fi-5650C assessment · keep earlier=yes and 100 sheets selected.
At a 110-sheet minimum with earlier models included, the M4099D still clears the documented 1,000-sheet maximum at 64 g/m²; the separate M4097D's 100-sheet A4/Letter rating does not. The fi-4990C also stays above 110 on its qualified 1,000-sheet maximum, but its A4 hopper basis is not an A3 capacity chart. The fi-5650C also qualifies at this minimum on its published 200-sheet A4 maximum; that is not an A3 or every-stock loading guarantee. Review the exact M4099D capacity qualification · check the fi-4990C limits · read the fi-5650C review · open the same earlier-inclusive 110-sheet finder.
fi-4990C: qualify the big number and the host
With earlier models included and a 200-sheet minimum, the fi-4990C matches on the manufacturer's maximum 1,000-sheet ADF rating at qualified paper conditions, not on a proven 1,000-sheet A3 load. Its U.S. datasheet describes selectable 250- and 500-sheet positions; the exact driver guide bases the maximum on A4 high-quality paper. See the fi-4990C capacity and paper-path review and keep earlier=yes and the 200-sheet minimum together.
With earlier models included, duplex, Manual Feed, historical TWAIN and a 200-sheet minimum required, the fi-4990C matches its sourced profile only through Ultra Wide SCSI; its English manual-feed procedure and size-specific capacity remain unknown. That means the selected capability labels do not establish a present working computer, card, cable, driver or safe special-media route. Read the exact fi-4990C assessment and open the same earlier/duplex/Manual Feed/TWAIN/200-sheet finder.
Add USB to that earlier duplex/Manual Feed/TWAIN/200-sheet task and the fi-4990C is excluded: the documented base interface is Ultra Wide SCSI, not USB. Its historical TWAIN label does not change the host connector or prove a current driver. The separate USB-capable fi-6400 is not a fi-4990C substitute; check its own requirements and keep USB and every other selected condition in the finder.
Does a TWAIN requirement mean USB?
With earlier models included, USB-to-computer, duplex, Manual Feed, TWAIN and a 200-sheet ADF minimum return 24 matches; without the USB requirement, the same other answers return 28, including the fi-4860C2, fi-4990C and M4099D, which the USB condition removes.
TWAIN describes a scanner-driver and capture-software interface; it does not name the cable or port between scanner and computer. The exact fi-4860C2 specification lists Ultra Wide SCSI (SE) and a shielded 68-pin connector, not USB. Its 500-sheet maximum is qualified to A4 or Letter at 80 g/m² (20 lb), not an A3 load. Read the fi-4860C2 assessment before treating its historical TWAIN/ISIS labels as a usable host setup.
The other excluded examples are distinct, not alternate names for the C2: the archived fi-4990C profile lists Ultra Wide SCSI, while the M4099D profile lists SCSI-2, RS-232C/video and a third-party interface path. Their documented TWAIN and manual-feed labels do not establish USB, a working current computer or safe use with any special original. See the separate fi-4990C review and M4099D review.
A different model still appears in the USB-filtered result: the fi-6400 assessment describes a USB-to-computer design with duplex, Manual Feed and TWAIN, but the exact current host, driver and application path still needs verification. The current U.S. fi-8700 is another match at 200 sheets on its A4/Letter 20 lb / 80 g/m² U.S. basis. PFU Japan's exact model table lists a separate Manual Feed/Single route; the U.S. product materials do not explain its procedure or media limits, so check the local operator's guide before relying on special-original handling. Read the fi-8700's U.S. capacity and regional feed notes. See the 24 matches with all six selected answers, or keep the same five task requirements but leave the connection open for the 28-match result. Before relying on any older unit, verify its actual interface board, cable/controller, supported host and paper-specific load limit.
fi-5750C: the 200-sheet answer is specific to the paper size
At earlier=yes with USB, duplex, TWAIN and a 200-sheet ADF minimum, the fi-5750C matches only on its qualified A4-or-smaller capacity; the same guide gives 100 sheets for originals over A4. Its separate flatbed supports book and nonstandard originals, but does not add feeder capacity. PFU's archived TWAIN/USB documentation is historical and does not establish current host compatibility. Read the exact fi-5750C review · Keep earlier, USB, duplex, TWAIN and the 200-sheet minimum together.
Keep USB, duplex, TWAIN and the 200-sheet minimum the same but leave earlier=no, and the fi-5750C is hidden; the standalone base fi-7600 remains a current-reference match with its own 300-sheet Letter/A4-or-smaller rating. The fi-7600's source separately limits originals over Letter/A4 to 100 sheets, so do not treat its maximum as a general paper guarantee. Read the base fi-7600 assessment · See why the earlier fi-5750C stays outside this default result · Keep the same requirements with earlier models excluded.
What changes when earlier models are included?
With the questionnaire’s “Yes — include earlier models” choice, USB, duplex, TWAIN and a 200-sheet minimum return 29 matches; keeping every technical answer fixed and choosing “No — limit results to currently listed models” returns 13.
This toggle changes the library scope, not stock certainty. The earlier fi-5750C appears only in the 29-model set, and its exact guide supports 200 sheets at 80 g/m² for A4-size originals or smaller, but 100 sheets for originals over A4. Its A3-capable scan path is not a 200-sheet A3 load. TWAIN and USB are documented historically, so verify the exact unit’s cable, host and driver rather than assuming current compatibility. Read the fi-5750C assessment.
The current U.S. fi-8700 also fits this USB/duplex/TWAIN/200-sheet combination in both library settings: its U.S. datasheet qualifies a 300-sheet ADF load to A4/Letter at 20 lb / 80 g/m², with capacity varying by document thickness. Its host-driver listing still does not guarantee compatibility with your computer or capture software.
The standalone fi-7600 remains in the 12-model default set: PFU rates its ADF at 300 Letter/A4-or-smaller sheets at 80 g/m², but 100 for larger originals. It is a distinct base model, not the fi-7600 FADGI service package. For units made on or after April 1, 2026, PFU says PaperStream IP 3.36.0 and earlier will not recognize the updated USB identifier and recommends 3.40.1 or later; confirm the unit’s build date and software. Read the base fi-7600 assessment.
See the 29 matches with earlier models included. Keep USB, duplex, TWAIN and 200 sheets but limit results to currently listed models (13 matches).
When the same USB, duplex and special-feed setup needs a larger batch
With “Yes — include earlier models” selected, USB, automatic duplex, a separate manual-feed route and TWAIN fixed, a 20-sheet minimum returns 71 matches; raising only the ADF minimum to 200 leaves 24.
The drop is a real feeder threshold, not a claim about daily scan volume. The earlier Brother ADS-1000W reaches the 20-sheet answer on its documented ADF limit: its U.S. guide specifies up to 20 sheets on 20 lb (80 g/m²) Letter paper or below the stated 2 mm total thickness. Brother describes its rear card slot as a separate route for plastic cards; that does not add ADF stack capacity, so the ADS-1000W does not meet a 200-sheet minimum. The exact fi-5900C stays in both sets: PFU and its version-9.21 driver appendix qualify its 500-sheet maximum to A4 stock at 80 g/m², under stated conditions. That is not a 500-sheet A3 promise, and the profile's separate Manual Feed label does not establish its procedure or the media it accepts. Review the ADS-1000W's feeder and card path · Read the fi-5900C paper and host limits.
The base fi-7600 is another member of both result sets, but its capacity basis is different: up to 300 Letter/A4-or-smaller sheets at 80 g/m², versus 100 above A4/Letter. The current U.S. fi-8700 is also eligible at these thresholds on its U.S. 300-sheet A4/Letter, 20 lb / 80 g/m² basis; PFU Japan's exact model table lists Manual Feed/Single, while the U.S. materials do not describe its special-original procedure or media limits. Do not transfer any model's capacity limit to another machine or stock. ADF capacity is per loading, not throughput. The fi-5900C's USB/TWAIN evidence is historical, with the displayed software matrix ending at Windows 8.1; verify the offered unit's interface, cable, host, driver and condition before relying on it. Compare the base fi-7600 assessment · Review the fi-8700's U.S. capacity and regional manual-feed notes.
See the 71 matches with the same requirements and a 20-sheet minimum. Change only the minimum to 200 sheets for the 24 matching configurations.
Earlier USB duplex models: use the ADF minimum as a real boundary
When earlier models are included, USB-to-computer capture, automatic duplex, documented TWAIN support and a 100-sheet ADF minimum return 71 reviewed matches; raising only the minimum to 110 leaves 33 because 38 profiles no longer meet the published capacity.
That filter reflects a documented paper-path requirement, not a promise of a current seller offer or a working driver on a particular computer. The earlier Brother PDS-6000 illustrates a 100-sheet load for 28–80 g/m² stock; its exact guide lowers the load to 90 at 105 g/m² and 60 at 127 g/m². Brother marks it discontinued, and its U.S. product page's carton table names a PDS-5000, so confirm the model label, condition and package rather than assuming those details for a resale unit. Read the PDS-6000 assessment.
The Fujitsu fi-5530C2 also reaches 100 sheets only on its Letter/A4, 20 lb (80 g/m²) basis; its listed A3 load is 50 on that stock. It is a separate, earlier ADF-only model, and historical USB/TWAIN documentation does not establish a present operating-system or application fit. Check the exact fi-5530C2 review.
For a higher published capacity, the earlier fi-6400 is rated up to 500 Letter/A4 sheets at 80 g/m², subject to a stack under 50 mm and under 5 kg. Its Manual Feed mode presents one sheet at a time through the ADF—not a second tray—and disables paper protection; discontinued status, current software and unit condition still need checking. Read the fi-6400 paper-path and host assessment.
TWAIN in this comparison means the model has a documented driver interface, not that a legacy download, license or current host is available. See all 71 matches with earlier models, USB, duplex, TWAIN and a 100-sheet minimum, or keep the same requirements and raise only the minimum to 110 sheets.
Match the special-original route to the job
With earlier models excluded, combining USB to a computer, duplex capture, a special-original route and a 20-sheet ADF minimum still requires checking what that route actually accepts; feeder capacity alone does not make every unusual original safe to scan. For supported envelopes or multi-layer transfer paper, the Brother ADS-4300N documents a Manual Single Mode alongside an 80-page feeder rated on 20 lb paper. Brother says multifeed detection is unavailable in that mode, and changing the separation switch during a scan can damage the scanner; a carrier sheet for irregular-size originals is a separate purchase. The Ricoh fi-8150 offers a different workgroup path: its 100-sheet ADF capacity is tied to specified Letter/A4 stock, while PFU describes Manual Feed Mode for individual originals under 7 mm thick. The compact Canon imageFORMULA R10 is narrower still: its dedicated slot is for supported plastic cards, one at a time, and is unavailable while paper is loaded in the ADF; it is not a general envelope or folded-page feed. The current U.S. fi-8700 fits this USB/duplex/20-sheet combination with its rated 300-sheet A4/Letter ADF; PFU Japan's exact model table lists a separate Manual Feed/Single mode, but the U.S. product materials do not explain its procedure or media limits, so confirm the local guide before relying on it for special originals. Read the fi-8700's regional manual-feed and capacity evidence alongside the ADS-4300N, fi-8150 and R10 assessments, then open the finder with earlier=no, USB, duplex, special feed and a 20-sheet minimum selected.
USB duplex scanning with a separate special-feed path
With earlier models included, USB, automatic duplex, a separate manual-feed route and a 100-sheet ADF minimum return 38 documented matches; raising only the minimum to 110 sheets reduces the result to 26 because twelve configurations no longer meet the published feeder threshold.
Two boundary examples are the fi-8190 FADGI package (CG01000-310281) and fi-8290 FADGI package (CG01000-310280): both keep a 100-sheet chassis feeder, so package services add no loading capacity. The fi-8290 also has a letter-size flatbed; the fi-8190 is ADF-only. The fi-8190 FADGI assessment and fi-8290 FADGI assessment explain the separate package and service uncertainties. For a model that remains above 110 on its usual paper, the fi-7600 is rated for up to 300 Letter/A4-or-smaller sheets at 80 g/m², but only 100 larger-than-A4 sheets at that paper weight. The Epson DS-32000 is a different example: Normal Mode is rated for 120 Letter/A4 sheets or 60 A3 sheets at 80 g/m²; Delicate Mode falls to 20 Letter/A4 or 10 A3 sheets at the same weight. Earlier fi-6400 specifications reach up to 500 A4/Letter sheets at 80 g/m², with the shared guide limiting the stack to under 50 mm and under 5 kg; its discontinued status means present driver access and used-unit condition need checking.
A separate manual-feed mode is not a promise that any special original can safely share the ordinary ADF stack. Check the exact media, mode, stock weight and supported host against the model's instructions. See all 38 candidates with the same earlier, USB, duplex, manual-feed and 100-sheet answers, or keep those same choices and raise only the ADF minimum to 110 sheets.
Earlier scanners and the ADF minimum
With earlier models included, a 100-sheet minimum returns 82 reviewed configurations; raising only that threshold to 110 sheets leaves 37, because the fi-4750C and M4097D are rated for up to 100 sheets, while the fi-4990C and M4099D are rated for up to 1,000 sheets at 64 g/m².
These are per-load figures, not daily output or guarantees for every paper size and stock. PFU's archived specifications list a 100-sheet maximum at 64 g/m² for the separate color-duplex fi-4750C and monochrome duplex M4097D. Both are earlier A3-class ADF-and-flatbed machines, but their exact reviews explain their separate configurations and legacy host limits: read the fi-4750C assessment and read the M4097D assessment.
For a higher published maximum, PFU's archived pages list 1,000 sheets at 64 g/m² for the color fi-4990C and monochrome M4099D. Those figures do not establish a 1,000-sheet A3 load, a working present-day interface, or a seller's unit condition or package. Compare the fi-4990C review and M4099D review for the distinct paper, host and inspection checks. A contrasting earlier compact model, the ScanSnap S1300, is specified for at most 10 Letter/A4 sheets at 80 g/m²; its exact PFU page makes clear that “include earlier” does not relax the selected minimum.
Before relying on any used scanner, verify the exact model, intended paper size and weight, available host connection and software, unit condition, and what is included. See all candidates with earlier models included and a 100-sheet minimum · Keep earlier models included and raise only the minimum to 110 sheets.
A 100-sheet feeder may not meet a 110-sheet load
With earlier models excluded, USB-to-computer capture, automatic duplex, TWAIN and a 100-sheet ADF minimum return 46 matches; raising only the feeder minimum to 110 returns 17, removing 29 profiles including the DS-530X, whose published load is 100 Letter sheets at 80 g/m².
The DS-530X B11B286201 is a compact USB-host option when the Letter/80 g/m² one-load limit is enough; its optional Flatbed Scanner Dock adds a separate glass route, not feeder capacity, and is not assumed in the base scanner. At 110, the DS-30000 B11B256201 remains a different USB/TWAIN choice, but Epson rates its Normal-Mode ADF at 120 Letter/A4 sheets and 60 A3 sheets at 80 g/m²—so a 110-sheet A3 batch does not fit that rating.
The DS-61000WN B11B283201 and DS-71000WN B11B284201 instead pair a 150-sheet ADF (at 80 g/m²) with an 11-by-17-inch platen; their Wi-Fi, Ethernet and panel workflows are separate from the USB host-capture/TWAIN route selected here. Check each guide's stock and original-size limits, current operating-system and TWAIN-application support, and the exact part before treating a published per-load figure as your working batch size.
Compare the DS-530X capacity and optional-dock assessment, DS-30000 size-specific feeder review, DS-61000WN workgroup review and DS-71000WN model review. See the 100-sheet result with those same USB, duplex and TWAIN requirements or keep every other answer and raise only the minimum to 110 sheets.
Does a 200-sheet minimum include an earlier 500-sheet scanner?
With earlier models included, a 200-sheet minimum returns 33 matches; the fi-4860C2 is one, but its 500-sheet maximum is for A4 or Letter at 80 g/m², not A3. The exact operator guide's hopper chart varies by paper size and weight, so the higher A4/Letter figure is not an A3, all-stock or daily-volume promise. A selected 200 sheets is a minimum per load, not a request to load 500 sheets. The fi-4860C2 also uses an old Ultra Wide SCSI (SE) connection; confirm a compatible host, installed interface and cable separately, along with the unit's condition and package. Read the exact fi-4860C2 assessment; the separate fi-4750C review explains why its sourced 100-sheet maximum at 64 g/m² falls short of 200, while size-specific loading limits remain to be checked in the exact guide. For a distinct USB configuration, compare the fi-7600 loading and host assessment; its own capacity limits are different. See the full result with earlier models and a 200-sheet minimum.
Keep the 200-sheet minimum but choose earlier=no, and the fi-4860C2 leaves the result because of the model-era setting—not because its documented A4/Letter capacity is below 200. The finder returns 12 matches under that setting. The separately assessed fi-7600 is one comparison: its sources qualify 300 sheets for Letter/A4 or smaller at 80 g/m² and 100 sheets for larger originals, rather than transferring either limit to the C2. Read the fi-7600 loading and host assessment. Keep the same 200-sheet minimum while excluding earlier models.