Model assessment · Fujitsu / PFU (Ricoh)

Fujitsu fi-5530C2 A3 duplex departmental scanner review

An earlier ADF-only duplex scanner with a USB or separately selected Ultra SCSI host interface, a 100-sheet Letter/A4 or 50-sheet A3 rated load, and historically documented TWAIN/ISIS capture.

Sources checked 2026-11-03 · Our editorial approach

Earlier model: use this assessment to identify an existing product or check a specific offer. Match the exact suffix, instructions and seller terms.

Review the exact model, limitations and buying checks on BuyerShortlists before choosing a seller. We may earn from qualifying purchases.

Fujitsu fi-5530C2 ADF scanner with paper guides and physical controls, viewed from the front
Official PFU/Ricoh image · fi-5530C2 PFU/Ricoh official exact-model page-linked image
A useful fit for

For a host-managed office workflow that needs automatic two-sided feeding, large Letter/A4 stacks, A3 originals and a USB capture route—provided the exact used unit and a currently compatible host/software path are verified before purchase.

The main tradeoff

This is a discontinued ADF-only machine, not a wireless mobile or flatbed model. Its 100-sheet figure is for Letter/A4 stock; the A3 rating is 50 sheets and heavy/unsupported originals change the practical limit. Current OS/app support, unit condition, roller life and seller package are unknown.

Your needs, this model

Does it fit your priorities?

Does the 100-sheet feeder rating also apply to A3 pages?

No. The published load is 100 Letter/A4 sheets at 20 lb (80 g/m²), but 50 A3 sheets on that same stock basis. Capacity varies by paper weight, so use the exact guide for the stock you will feed; this is a per-load figure, not daily throughput.

Explore this need in the finder →
Can it automatically capture both sides of a document?

Yes. The manufacturer specifies simplex/duplex ADF capture. Its 35 ppm/70 ipm portrait and 50 ppm/100 ipm landscape figures are at 200 dpi and are not independently tested results. It has no separate flatbed.

Explore this need in the finder →
Can it take an ID card or a long document?

The guide describes one ISO 7810 ID-1 PVC/PVCA card at a time, fed through the ADF in portrait; it excludes embossed cards and card scanning with the optional imprinter installed. The manufacturer also lists long-page scanning up to 34 inches, subject to size, paper and scan-mode limits.

Explore this need in the finder →
Is it ready to connect to a current computer?

The U.S. datasheet names USB and historical PaperStream IP TWAIN/ISIS. An archived PFU updater names fi-5530C2 as a target and separately lists historical software and Windows 10/older OS options, but warns its content may be out of date. That does not establish a working current driver, app, download, host or license. Verify the exact operating system and unit before relying on a used scanner.

Explore this need in the finder →

The Fujitsu fi-5530C2 is an earlier, office-oriented scanner built around an automatic document feeder rather than a glass platen or a wireless workflow. This assessment uses the manufacturer's U.S. datasheet, a model-qualified operator guide and archived PFU/Ricoh specifications; it is not based on hands-on testing. The most important fit question is whether a host-managed ADF routine still suits your office and whether you can verify a working software path for the exact unit.

Identify the C2, not the neighboring fi-5530C

PFU America lists the fi-5530C2 as a separate Departmental model in its U.S. Discontinued for Service roster. The historical U.S. datasheet identifies the C2 as part PA03334-B665. It is not the earlier fi-5530C assessment under a cosmetic suffix: the two models have distinct source records and their own published details. Ask for a clear photo of the nameplate on a used machine, because the datasheet is not evidence of the part suffix or condition of a particular seller's unit.

A 100-sheet Letter/A4 feeder does not mean a 100-sheet A3 load

The C2's headline capacity is 100 sheets of Letter/A4 at 20 lb (80 g/m²); the listed A3 load is 50 sheets on that same paper basis. The operator guide makes the practical point explicit: maximum loading changes with document size and paper weight. It specifies 52–127 g/m² media, with the 127 g/m² exception limited to A8 sheets. Do not plan on a full hopper when feeding heavier stock, mixed sizes or originals that the guide flags as difficult. A capacity number describes one loading, not a daily workload.

This is an ADF-only machine. There is no separate glass bed for a bound page and the manual does not establish a distinct Manual Feed mode. The guide does describe scanning one standard ID-1 PVC/PVCA card at a time through the ADF in portrait. Embossed cards are not supported; very stiff cards may feed poorly; card scanning is unavailable when the optional imprinter is installed. The manufacturer also lists long-page scanning up to 34 inches, but that does not remove the manual's limits on stock, size and scan mode.

Duplex capture and rated speed

The U.S. sheet specifies ADF simplex and duplex capture, with 600 dpi optical resolution. At 200 dpi it lists 35 pages per minute / 70 images per minute for A4 portrait and 50 / 100 for A4 landscape. These are scanner-side manufacturer rates; application work and data transfer can change actual job time, so they are not a promise about a particular office batch. The C2's earlier fi-5530C sibling has its own U.S. figures—35/70 portrait and 47/94 landscape—and should not inherit this model's part number, software package or specifications.

Daily-volume figures deserve restraint. The archived Global model page says 4,000 pages per day in its specification table but up to 5,000 in its prose; the older linked brochure gives a 3,000–5,000 range. Those official statements do not resolve to one dependable number, so this review does not use a daily-volume threshold to recommend the scanner.

Computer connection and software need a present-day check

The documented host interfaces are USB 2.0/1.1 and Ultra SCSI. PFU's catalog says they are selectable alternatives and cannot be used simultaneously. For most readers the sensible plan to investigate is USB; a SCSI setup requires compatible interface hardware and the right cable as well as working scanner software. The manufacturer documents PaperStream IP with TWAIN/ISIS, along with PaperStream Capture and administration tools, but those package-era names do not prove that drivers install on a current operating system or that a used-unit software license transfers.

An archived PFU fi Series Online Update page (version 1.2.10.4) names the fi-5530C2 among target scanners. It separately lists PaperStream IP (TWAIN, TWAIN x64 and ISIS), PaperStream Capture and related software, as well as Windows 10 and older Windows/Server versions. The page warns that its archived content may be out of date; it does not prove a present driver, install media, license or current host compatibility. The materials do not establish macOS, Linux, mobile scanning, Wi-Fi or direct-to-cloud use. Before relying on the C2, match the physical scanner, host port, operating-system architecture, driver version, capture application and license together. A USB connector alone does not establish that a current computer can operate the device.

Service history matters more on an older feeder

The guide includes cleaning and replaceable-part procedures. The manufacturer lists the pad assembly at 100,000 sheets or one year and the pick roller at 200,000 sheets or one year as service guidance. Those intervals are not a condition report: ask for the page counter and maintenance history if available, inspect the feed path and rollers, and confirm that suitable replacements can still be obtained. An optional post-scan imprinter appears in the model material; it is not a reason to assume an imprinter, cartridge or other accessory is in the seller's box.

Who should keep it on a shortlist?

Keep the fi-5530C2 in view only if an earlier, host-connected duplex ADF is acceptable, your routine mainly uses Letter/A4 stock, and the seller can demonstrate the exact unit and a compatible computer/software arrangement before purchase. Its A3 size range, rated 100-sheet Letter/A4 load and two-sided feeder path describe a useful departmental workflow on paper. Its age, separate USB/SCSI setup, unresolved present software support and unknown used-unit condition are meaningful costs of choosing it.

For originals that need glass, compare a documented flatbed model instead; for wireless or phone-led work, this C2 is the wrong workflow rather than a feature-rich alternative. Check the nameplate, feeder and roller condition, included cables and power adapter, host connection, license and return terms before placing an order. The archive and historical datasheet describe the model, not the contents or condition of a current reseller package.

Key specifications

Key details at a glance

Scanner classProfessional departmental sheet-fed scanner
Manufacturer-listed simplex rate35 ppm
Manufacturer-listed duplex image rate70 ipm
Automatic document feeder capacity100 sheets
Optical resolution600 dpi
Connection optionsUSB / Ultra SCSI
Automatic duplex captureYes
TouchscreenNo
TWAIN driver documentedYes

Use the exact model’s instructions for operating limits, supplied equipment and version differences.

Sources for this review

Sources for this assessment

Compare the workflow before you choose

Use the finder to test your connection, paper and software requirements against the documented scanner arrangements.

In this review

Questions to consider for this model

Read the matching requirement, its tradeoffs and the other reviewed options.

More matching requirements
Combine my requirements →